Skip to main content

I was wondering if anyone ever had any luck getting the shell off one of the Railking MP15ACs. In the instructions it states removing some screws on the bottom will release the shell. This is the case with the premier GP38-2s which I've disassembled many times. that doesn't seem to be the case here. 

Once the screws are removed there seems to tab at the front of the shell holding it to the chassis. I cant for the life of me manage to undo this. It's really stiff and hard to push in, I tried to with a flathead screwdriver and I felt like I was gonna break the thing. I certainly scratched the heck out of it, although that doesn't bother me much because you'll never see it way under the loco. 

Anyone ever taken one of these apart?

Last edited by Billbarman
Original Post

Replies sorted oldest to newest

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×