Skip to main content

Hello

I have a PS 2 c&o kanawha 20-3186-1. I completed a factory reset on the engine recently and have now noticed that the illuminated number boards are not working. I am still getting lighting in the marker lights and the headlight. I tried a feature reset and another factory reset but no change. Any suggestions?

Last edited by Peter Frenzel 010119
Original Post

Replies sorted oldest to newest

Not going to work.  This is PS-2 3V with board in the tender.  So it uses the MUX.  The ditch outputs don't go to the engine.  The HL, IL/FB combo, Markers normally fed off Engine MUX from a single control input from tender.

Frankly, I am not sure how they handled the Number boards.  Possibly it is off the HL Line (3 bulbs).

You can try it but I think your going to have to open the engine shell to see what is going on.

Is the Cab Light and IL on?  G

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×