Skip to main content

Replies sorted oldest to newest

You have to sneak up on stuff when you’re running O72. What looks great on a section of straight track, can make things collide in curves. Assuming you’re talking about MTH’s wireless drawbars, they’re all marked as to their length, that measurement is center of hole to center of hole. Granted, one hole is square, but you can make “test” draw bars from scrap styrene and place some O72 track on your bench, and this’ll give you an idea what will and won’t work,…..This way, you’ll be armed with knowledge before committing, and testing your set up cold on a workbench doesn’t blow stuff up….make some samples, then measure the hole center to hole center, and you’ll know what will work….

Pat

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×