Skip to main content

5.5mm OD with 2.1mm ID pin size -arguably the most common size as many security cameras, power adapters for routers and so forth use this same size.

I know you didn't ask, but info to keep in your back pocket of train knowledge.

Fastrack is the funky one- they use the fatter 2.5mm pin size. So you cannot directly plug in a Z-1000 brick into fastrack because the fat pin in the connector of the Fastrack won't go into the smaller 2.1mm hole of the Z-brick connector.

Conversely, a Lionchief power supply for Fastrack from a starter set will plug into a TIU port, and because the smaller pin still makes contact, so you can use those Lionchief bricks, and repurpose them to power a TIU.

Last edited by Vernon Barry

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×