I picked up this 763E real cheap (275.00) a few weeks ago at the Hamburg Show and had a chance last night to run it on my friend Steve's layout. This is my first TMCC steam engine (that I am going to keep)...sorry for the grainy Iphone vids.
![IMG_3280[2]](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/42680069238036955/primaryPicture/true/filePointer/42680069304687587/fodoid/42680069304828047/imageType/SQUARE_THUMBNAIL/inlineImage/true/thumbnail.jpg "IMG_3280[2]")
![IMG_3283[1]](https://ogrforum.ogaugerr.com/fileSendAction/fcType/0/fcOid/42680069238036955/primaryPicture/true/filePointer/42680069304687588/fodoid/42680069304833424/imageType/SQUARE_THUMBNAIL/inlineImage/true/thumbnail.jpg "IMG_3283[1]")
Replies sorted oldest to newest
Hi Bob,
Very nice, it runs really good !!!!
Thanks for posting
Alex
763E?
That doesn't look like a tin plate tender to me.
But then I had to look quickly. 
763E?
That doesn't look like a tin plate tender to me.
But then I had to look quickly.
The loco is a Lionel 6-18056 from 1997.
.....and the Vanderbilt tender is incredibly heavy. When this engine came out the purists let out a howl because there were no NYC Hudsons with Vanderbilt tenders. I have one and like it just because its different and it runs well too. That being said, I did purchase a Lionel PT Tender to run along with it and it makes for a very handsome combination.
Looks good but you really should slow it down for the video so we could have a better look.
Access to this requires an OGR Forum Supporting Membership
