My last battery has falled in my visionline challenger

A little more info would be helpful.

Rod Miller

I assume he's talking about Gunrunnerjohn's device.  I agree though, more info is needed that will help GRJ help you.

Does the sound work normally without the YLB installed?  If you have a problem with the YLB itself, you can contact me at yourlastbattery@will-enterprises.com and we'll fix you up.

gunrunnerjohn posted:

Does the sound work normally without the YLB installed?  If you have a problem with the YLB itself, you can contact my at yourlastbattery@will-enterprises.com and we'll fix you up.

The sound works normally, but the YLB does not hold a charge anymore. I will send you a email shortly.

Thanks.

Vision Line Challenger does NOT need a battery. I run mine command only; never have, never will put battery inside.

You don't "need" a battery for TMCC/Legacy in command mode, but some models tend to have sound dropouts when you have brief power interruptions such as running over switches or dirty rails.  Having a battery prevents that from happening.

I run mine in command and that one as well ad a couple of others drop sound form time to time and it requires a shut down and restart to get it back.

My Vision Line GG1 and Vision Line Big Boy drop sound going over my Atlas O #5 Double-Slip switches.  The engines need these batteries or a standard battery to keep the sound on.  After going over a switch, the sound gets softer.  Eventually the sound will shut off or create crackling noise.

Sincerely, John Rowlen

Gunrunner John,  I tried to order the battery cables from Lionel, but they don't put them in the engines anymore, so they will not be handling these parts in the future. 

How will I connect my YLB batteries I purchased if the sound battery cable is no longer available?

Sincerely, John Rowlen

John Rowlen posted:

Gunrunner John,  I tried to order the battery cables from Lionel, but they don't put them in the engines anymore, so they will not be handling these parts in the future.  How will I connect my YLB batteries I purchased if the sound battery cable is no longer available?

I'm looking at a variant that will have a direct connection to the RS-Lite board, I made myself a couple and put one in my H10 for testing.  Same product, just replace the battery clip with a cable.  When I get a new order of the YLB boards in, I'll add these to the product line for newer Legacy stuff.

Gunrunner John,  Do you have any battery cables available for the two YLB I purchased last month?  I see you have three more at Henning's Trains. I was hoping to get batteries in my steam engines to prevent damage to the sound systems.  I will call Henning's Friday morning.  Thanks. 

I have three H-10: Pennsylvania Lines #1709, Western Allegheny #85, and the soon-to-arrive Pennsylvania #1773 Coal Hauler H-10.  I like these small steam engines and may sell many of my large articulated steamers.  My 990 doesn't have room for half of my engines.  I will need many YLB.

Sincerely, John Rowlen

Gunrunner John,

What will conventional Lionel operators do to power the sound at start up and shut down?  I don't think Lionel has thought this through, … or doesn't care.  Without a battery cable for sound support power, the small engine's sound systems will take a beating going over large footprint switches and cross-overs.

I have come to the conclusion that the corporate people who make the decisions about Toy trains Do not run them themselves.  "What good is 'talking to them' if they do not understand 'the language of model railroading' ?

Sincerely, John Rowlen

I think conventional operators will just put up with the sounds cutting out regularly.

I don't know that it'll harm the sounds, just makes them annoying to run with sound on.

FWIW, one of the design goals of the YLB was to charge at low voltages where conventional operation would be running at.

I have a few cables, send me an email and we'll get you what you need.

John Rowlen posted:

Gunrunner John,  Do you have any battery cables available for the two YLB I purchased last month?  I see you have three more at Henning's Trains. I was hoping to get batteries in my steam engines to prevent damage to the sound systems.  I will call Henning's Friday morning.  Thanks. 

I have three H-10: Pennsylvania Lines #1709, Western Allegheny #85, and the soon-to-arrive Pennsylvania #1773 Coal Hauler H-10.  I like these small steam engines and may sell many of my large articulated steamers.  My 990 doesn't have room for half of my engines.  I will need many YLB.

Sincerely, John Rowlen

Here are some...for future need.

f:0" target="_blank">https://www.ebay.com/itm/9V-Ba...33f40e3998:rk:1f:0

Chuck, you have to add the proper connector to those.

gunrunnerjohn posted:

Chuck, you have to add the proper connector to those.

Oh. The connector is the 2 pin female pins JST?   Which, 2.0 or 2.5 mm?

It's the PH series, 2.0mm

Thank you John.

clarification

I have battery cables from the ERR kits that I was thinking of using. However there seems to be a polarity problem on the plug on the cable compared to the Bruk diagram of the railsounds lite diagram. Don't know if

if the plug is wrong on the cable, the circuit board plug is wrong or the Bruk diagram is wrong, or the ERR battery cables are different and should not be used

any comments? or am I way off base?