Skip to main content

I could swear I saw another thread about these great new locos but it seems to have disappeared.  So I will post here about my delight with the two I bought.  I bought both a New York Central and an Illinois Central model from Pat's Trains, and they arrived last week.  I think they are incredibly good looking locos, and they certainly are great runners – just great toy locomotives all the way around.

The Boston and Albany Railroad (later part of the NYC) is the only US railroad that steamlocomotive.com’s database indicates owned and ran 4-6-6 tank engines, although I recall reading somewhere once that the Illinois Central had some, too.  Regardless, the D-1A is one of the best-looking small steamers I have ever seen.

The D1-As had a headlight, running lights and “cow-catcher” at the rear as shown below.  The narrow coal load gave the engineer as good a view of the track ahead going backwards as as when going forward.  So they were often used as switchers, and routinely driven backwards when pulling a train, rather than having to be turned around on a turntable.  These Lionel 4-6-6s have a very pretty scale coupler at the front, which I will replace with a lobster claw so they can pull a train like this . . .

These are big for a small steamer – if that makes sense.  To the left in the photo below is my new Lionel New York Central D1-A tank loco, and to the right a Legacy NYC ten-wheeler I’ve had for several years.  both are 1:48 scale.  Discounting the “tank” part of the D-1A, the two locos are roughly the same length although the tank engine is slightly taller and wider.  In the real world the 4-6-6 was a good deal more powerful, but as models they are about equal: both weigh enough to have plenty of traction and they have enough power to pull a long train well.

K-line made a model of this loco way back when (far left).  Ten years ago I bought a used one from Trainz because I thought it was such a good looking model.  It was detailed, well made, and looked great.  But it was a truly terrible runner with hairtrigger jackrabbiting and a cruise that didn't control well.  So much as I wanted to run it, it quickly became a shelf queen.  My new Lionel NYC (middle) and ICRR models (right) are clearly made from the K-Line molds and plans.  All but one thing one them appears to be identical to the K-line model).  They do seem to be slightly better assembled (pipes and all look straighter, graphics a bit sharper, etc., but maybe that's just fifteen plus years of age at work . . .  

That one thing that is different is the coal load.  On the K-line model it was cast in the metal.  The Lionle locos have a real coal load. 

I cannot speak to how these locos run in Legacy because I haven’t run that system on my layout since 2008.  I’ve used only conventional for the last thirteen years, and LC+ (Lionchief Plus) since it came out.  In LC+ mode using Lionel's Universal Controller, these locos run as well as I could ever want: they start slowly, pull well and run very smoothly at as low as 2 scale mph.  They respond quickly and linearly to the throttle, with speed increments that look to be around 1 mph each. 

In conventional they respond well to the direction button, they pull well, and their cruise automatically works well at scale speeds above 20 mph, but they do not run smoothly at speeds below that.  Both of mine have a ‘stutter’ - a slight hesitation once per driver revolution as if they have a binding gear - until they get above about a scale mph.  They don’t do that in LC+.

Both engines have good, but not great, sound.  There are four chuffs per revolution which have a fair complexity to their sound, but they don't sound special and aren’t as loud and deep as on many other steamers I have.  I think the limited space for the speaker, etc. may have something to do with that.  Whistle and bell are good but again, nothing special.   Still, I’m pleased with the sound .

     The smoke is spectacular.  No other word applies.  It pours out of the stack (left below) – as much as I’ve seen from any steam loco I have.  The whistle steam (right) is particularly good, too, and a feature I am coming to really like!!  Operating the whistle steam does nothing to diminish or change the amount of smoke coming from the stack, it looks very realistic – and dramatic!.

At $1,100 list price, even with a good pre-order discount, these locos are expensive, particularly considering their size.  But I think they are worth it and I am extremely pleased with them.  Unlike the K-Line model I have had for the last many years, these big tank engines will not be shelf queens.  They will be hard at work on the layout, a lot.  I love 'em!!!

 

 

 

Attachments

Images (11)
  • mceclip0
  • mceclip1
  • mceclip2
  • mceclip3
  • mceclip4
  • mceclip5
  • mceclip6
  • mceclip7
  • mceclip8
  • mceclip9
  • mceclip10
Original Post

Replies sorted oldest to newest

@Lee Willis posted:

I could swear I saw another thread about these great new locos but it seems to have disappeared.  So I will post here about my delight with the two I bought.  I bought both a New York Central and an Illinois Central model from Pat's Trains, and they arrived last week.  I think they are incredibly good looking locos, and they certainly are great runners – just great toy locomotives all the way around.

The Boston and Albany Railroad (later part of the NYC) is the only US railroad that steamlocomotive.com’s database indicates owned and ran 4-6-6 tank engines, although I recall reading somewhere once that the Illinois Central had some, too.  Regardless, the D-1A is one of the best-looking small steamers I have ever seen.

The D1-As had a headlight, running lights and “cow-catcher” at the rear as shown below.  The narrow coal load gave the engineer as good a view of the track ahead going backwards as as when going forward.  So they were often used as switchers, and routinely driven backwards when pulling a train, rather than having to be turned around on a turntable.  These Lionel 4-6-6s have a very pretty scale coupler at the front, which I will replace with a lobster claw so they can pull a train like this . . .

These are big for a small steamer – if that makes sense.  To the left in the photo below is my new Lionel New York Central D1-A tank loco, and to the right a Legacy NYC ten-wheeler I’ve had for several years.  both are 1:48 scale.  Discounting the “tank” part of the D-1A, the two locos are roughly the same length although the tank engine is slightly taller and wider.  In the real world the 4-6-6 was a good deal more powerful, but as models they are about equal: both weigh enough to have plenty of traction and they have enough power to pull a long train well.

K-line made a model of this loco way back when (far left).  Ten years ago I bought a used one from Trainz because I thought it was such a good looking model.  It was detailed, well made, and looked great.  But it was a truly terrible runner with hairtrigger jackrabbiting and a cruise that didn't control well.  So much as I wanted to run it, it quickly became a shelf queen.  My new Lionel NYC (middle) and ICRR models (right) are clearly made from the K-Line molds and plans.  All but one thing one them appears to be identical to the K-line model).  They do seem to be slightly better assembled (pipes and all look straighter, graphics a bit sharper, etc., but maybe that's just fifteen plus years of age at work . . .  

That one thing that is different is the coal load.  On the K-line model it was cast in the metal.  The Lionle locos have a real coal load. 

I cannot speak to how these locos run in Legacy because I haven’t run that system on my layout since 2008.  I’ve used only conventional for the last thirteen years, and LC+ (Lionchief Plus) since it came out.  In LC+ mode using Lionel's Universal Controller, these locos run as well as I could ever want: they start slowly, pull well and run very smoothly at as low as 2 scale mph.  They respond quickly and linearly to the throttle, with speed increments that look to be around 1 mph each. 

In conventional they respond well to the direction button, they pull well, and their cruise automatically works well at scale speeds above 20 mph, but they do not run smoothly at speeds below that.  Both of mine have a ‘stutter’ - a slight hesitation once per driver revolution as if they have a binding gear - until they get above about a scale mph.  They don’t do that in LC+.

Both engines have good, but not great, sound.  There are four chuffs per revolution which have a fair complexity to their sound, but they don't sound special and aren’t as loud and deep as on many other steamers I have.  I think the limited space for the speaker, etc. may have something to do with that.  Whistle and bell are good but again, nothing special.   Still, I’m pleased with the sound .

     The smoke is spectacular.  No other word applies.  It pours out of the stack (left below) – as much as I’ve seen from any steam loco I have.  The whistle steam (right) is particularly good, too, and a feature I am coming to really like!!  Operating the whistle steam does nothing to diminish or change the amount of smoke coming from the stack, it looks very realistic – and dramatic!.

At $1,100 list price, even with a good pre-order discount, these locos are expensive, particularly considering their size.  But I think they are worth it and I am extremely pleased with them.  Unlike the K-Line model I have had for the last many years, these big tank engines will not be shelf queens.  They will be hard at work on the layout, a lot.  I love 'em!!!

 

 

 

The other threads did not disappear.  They were moved to the Lionel categories (as will this thread) since this is not a traditional product.  Nice comparison!

Where is Hot Water when you need him?

The Illinois Central had steam locomotives for commuter service, but not 4-6-6T. I seem to recall an engine with a light mounted high on the tender so the commuter train could run in reverse, just like how Metra trains run now. Should be something at the Illinois Railway Museum too.

Didn't find that engine, but I did find this. Putting a link down in case of copyright issues.

https://www.railarchive.net/ra...eam/images/ic201.jpg

And what do you know, this engine is at the Illinois Railway Museum according to this page:

https://www.irm.org/cgi-bin/rs...Central+Railroad=201

I purchased the ICRR model and like the engine and it does smoke incredibly.  

This has been an interesting engine.  

Will be calling Lionel as I am experiencing issues and some I have never seen occur previously.

1.) Stops all of sudden and lights on engine go off.  Then if I turn the legacy dial either way it takes off like a rabbit or it restarts on its own.  Learned this by accident.

2.) After being programmed it will start on other numbers or when starting another engine.

3.) After completely shutting down engine, it starts to move on its own without any sound or other features.  Just creeps along

4.) Whistle steam smokes but not ejected but emits out the port at a continuous rate. 

5.) Finally when running it sounds rough when running.   

#1,2 & 3 are items I have not experienced previously with any other engines.   I have experienced forgetting engine ID but not how this randomly startsup with other numbers being activated.

Figured would post my experience just to see if anyone else has seen similar issues 

Attachments

Videos (1)
trim.FE83FF25-98F3-45B8-934F-7CCD1D0C8D3E
Last edited by jjwyatt
@TM Terry posted:

As best I can find, Schenectady in 1928 only made five 4-6-6T's, all five going to Boston and Albany (#400 - 404). And I can only find that #402 went to NYC and numbered 1297.

Were there any more 4-6-6T's made? And did any other railroads operate any of these 4-6-6T's?

All 5 B&A D-1a locomotives were reassigned to the New York Central in March 1951. Numbers 400-404 were renumbered 1295-1299 respectively. They are documented to have been in service in central and western New York State, specifically in the Buffalo, Syracuse and Watertown areas. They didn't last long. 1296 and 1299 were scrapped in August 1951 after just 5 months followed by 1298 in October 1951. 1295 and 1297 were scrapped in February and March 1952 respectively.

I have not seen 4-6-6T's on other railroads. I may be wrong but it seems like they were built special for the B&A.

Last edited by NYC Fan

As I recall, you worked at GM-EMD in LaGrange

Yes, but I started in the Field Service Dept. (June 1, 1962), then served as District Engineer for SCL & FEC out of Jacksonville, FL. I was promoted to the Sales Engineering Dept. at the LaGrange Headquarters, in Nov 1972.

and also have volunteered at the Illinois Railway Museum.

No, not really. I did assist with some projects, and have provided technical information to them.

Can you shed some light on Illinois Central tank engines?

Not really, as I was born & raised in New Jersey, and thus have little knowledge of the IC. I can recall seeing photos of some of their VERY early "Commuter Tank locomotives", and am pretty sure that none of them were of the 4-6-6T wheel arrangement.

I grew up along the branch that goes to Iowa, the only time I got to see the commuter trains was on trips along LSD.

 

 

@TM Terry posted:

As best I can find, Schenectady in 1928 only made five 4-6-6T's, all five going to Boston and Albany (#400 - 404). And I can only find that #402 went to NYC and numbered 1297.

Were there any more 4-6-6T's made? And did any other railroads operate any of these 4-6-6T's?

Several authoritative reference books on the New York Central and Boston & Albany railroads refer to the five B&A D-1a 4-6-6T engines as the "biggest," "heaviest," and "most powerful tank engines" made in America. The B&A also had eighteen 2-6-6Ts. The New York Central & Hudson River Railroad had 2-4-4Ts. The Central Railroad of New Jersey had twenty-five 2-6-2Ts and five 4-6-4Ts. Illinois Central had double-ended 2-4-4T engines in Chicago suburban service and also one 2-6-4T. The New Haven Railroad had several types of small double-ended tank engines built prior to 1900 but nothing with a 4-6-6T wheel arrangement or comparable to the Boston & Albany 4-6-6Ts.

MELGAR

Last edited by MELGAR

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×