Tried searching for the posts that showed which wires were rerouted on a PS-3 engine to correct weak track signal issues.

No luck.

I remember it was wires that were incorrectly routed under some board that were causing interference with the signal.

Any help finding the articles will be greatly appreciated.

Thanks,  Joe

Original Post

Ensure Capacitors are folded down horizontally across board.  Route wires above them if necessary, but never underneath caps or directly over board when caps are vertical.  G

MTH Authorized Service Center

Authorized ERR Dealer

Lionel Independent Repair Tech

Virginia Train Collectors Member

I had found some routing issues for wires in the tender. Might be useful.

Add Reply

Likes (1)
The DCS Forum is sponsored by
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653