Based upon back and forth over wonderful layout by Dougie Fresh in this thread:
Since they live in an apartment in Queens and this will go on a 2" thick foam board and stand behind a dresser when not in use, and since there is no room for remote switch controls I wanted to go with manual turnouts. After a lot of research I decided that manual 036 Fastrack switch throws easily break and according to Caboose industries are nearly impossible to use their 208S on.
So I decided to go with Gargraves manual switches that use the 208S Caboose manual switches because if he breaks them off they are easily and cheaply replaced.
Here is what I have and the SCARM plan is included.
I also need an exit back out at the top from the inner loop to the outer loop, but I can't figure that out.
Thanks for the help.