Skip to main content

Hi all
I have suddenly noticed a clanking sound coming from my R62 power car. I will later upload vid.  I hope all that is needed is a battery change. But i did check the dcs remote and it says battery is ok. So i hope it is not that the motherboard is about to go. I also notice that it first starts out fine and i can hear the bell and horn. But after a little while the clanking sound starts and i can no longer hear the bell or horn.
Thanks.
Original Post

Replies sorted oldest to newest

MTH z1000.

Are you using the Z-brick alone or also the Z-Controller? If using the Z-Controller, remove it.


Also, is it a very soft clanking sound? If so, try turning off Clickety-Clak:
   Menu/Sound/Clickety-Clak, set to off.

This and a whole lot more is all in "The DCS O Gauge Companion 2nd Edition", now available for purchase as an eBook or a printed book from MTH's web store site! Click on the link below to go to MTH's web page for the book!

 
 
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×