Skip to main content

Just purchased a new Lionel Legacy Mohawk. Love the whistle effects on this unit. Since I have not bought a recent legacy in a many years and I still don’t have a legacy control system I have a few questions if someone can advise. Thanks in advance.

1. Do these newer engines need batteries in the tender as I do not see this in the manual but have not taken the shell off to confirm?

2. In command mode, can you adjust volume as I have not found an adjusting knob/switch on the tender? I can adjust it when operating in Bluetooth mode. Did Lionel do away with this?

3. Even with some of my other engines, the manual only states to oil the engine. When do you have to ever grease it?  It only has one screw port for access? Picture below. I don’t even know how to take out the grease like on a postwar unit.

ACE3A491-7E8C-43D1-A3D6-CA52E59727B5

Attachments

Images (2)
  • D96735E2-949C-4E9C-AFE4-A9D762BF54DC
  • ACE3A491-7E8C-43D1-A3D6-CA52E59727B5
Original Post

You don't need any batteries, though it would be useful in conventional mode.  Smaller tenders with closely spaced rollers have sounds cutting out.  Since there is no long a battery provision, I've come up with a fix: New Legacy Steam Locomotive Sound Issue and Fix

Correct, no manual volume control, you can adjust it with the remote in command mode.

Yes, you should grease it, just open the port and use a small grease applicator to shoot some grease in.  No need to remove the old grease as a rule, just make sure it has new grease every 100 hours or so.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×