Finally got my enclosure so I could finish my O scale Tank engine. 17 hours to print the detail of the boiler and cab. It worked!. Since this is my first "bigger" project a lot of lessons learned. For Details see my O scale Tank Engine page.
Replies sorted oldest to newest
GREAT JOB VAL!!!! VERY, Very Nice Write Up!
Very nice result and a neat project. I wish someone would do a GWR 14xx/48xx.
WOW, that's a big 3dprint, looking forward to seeing the completed project. 
As shown in the picture link above, details have been added. We page has been updated with parts lists and lessons learned. If anyone wants my 3d printed adapter pieces and 2026 clearance model, let me know by email. Since the original model is not mine, I hesitate to add it to the catalog.
@BenLMaggi posted:Very nice result and a neat project. I wish someone would do a GWR 14xx/48xx.
Dapol does this one:
Try #2, Green this time, worked well I updated the web page and added links to my files. Tank Engine Page About 25 hours of printing, $100 of used engine parts and 20-40 hours of work and you can make your own engine.
Whenever the Prusa pages make it so we can email each other, I will see if I can get permission to put it all in the 3D catalogue. Until then my web page will have to do.
Nice job.
Access to this requires an OGR Forum Supporting Membership
