Skip to main content

@coach joe posted:

I notice David's Nickel Plate pups have a squarer nose and tandem axles.  I wonder how many of the Lionel TOFCs came that way?

As a rough guideline, Lionel’s pup trailers are: tandem axle, square nose on trailer; single axle, rounded nose on trailer. The trailers and flatcars are not interchangeable, because of the relative position of the chocks on the different trailers, to accommodate the different axle configurations.

Tandem axle vans - Wabash, Western Maryland, NKP, Katy, Frisco, NY Central Flatcar w/ Gleason/Sasib vans. There may be others I’m unaware of.

Last edited by Mark V. Spadaro

As a rough guideline, Lionel’s pup trailers are: tandem axle, square nose on trailer; single axle, rounded nose on trailer. The trailers and flatcars are not interchangeable, because of the relative position of the chocks on the different trailers, to accommodate the different axle configurations.

Tandem axle vans - Wabash, Western Maryland, NKP, Katy, Frisco, NY Central Flatcar w/ Gleason/Sasib vans. There may be others I’m unaware of.

Thanks for the info I’ve also seen a Lionel Lines in a tandem

Thank you for this topic. I'm new in this but trailers on flatcars are some of my favorites. I had already bought Lionel 6-26951 that is a T.T.X. flatcar carrying PRR trailer# 15104. Then I bought MTH 30-7626 that is a PRR flatcar and was surprised to see that the PRR trailer on it has the same # 15104. I guess they modeled the same prototype, even though the logos on the trailers are in different locations.

PRR15104

Attachments

Images (1)
  • PRR15104

After running these piggyback cars for the first time I have discovered that the trailers don't stay on the flat cars to well. I have been experimenting with making wheel chocks that  will better hold the trailers to the flat cars. These are 3D printed and mount to the slots on the flat car the same as the original wheel chocks.

Wheelchocks 01Wheelchocks 02

Attachments

Images (2)
  • Wheelchocks 01
  • Wheelchocks 02

After running these piggyback cars for the first time I have discovered that the trailers don't stay on the flat cars to well. I have been experimenting with making wheel chocks that  will better hold the trailers to the flat cars. These are 3D printed and mount to the slots on the flat car the same as the original wheel chocks.

Wheelchocks 01Wheelchocks 02

I added a little hot glue to keep mine in place, you can always take it off if wanted.

After running these piggyback cars for the first time I have discovered that the trailers don't stay on the flat cars to well. I have been experimenting with making wheel chocks that  will better hold the trailers to the flat cars. These are 3D printed and mount to the slots on the flat car the same as the original wheel chocks.

Wheelchocks 01Wheelchocks 02

David that is a great idea did it improve the ride?

As long as we're doing this it's probably worth including a picture of the guys who got this whole thing started - the Cooper-Jarrett van cars in gray and white.

Lionel_CJ_van_grayred

Lionel_CJ_van_whitered

for whatever reason the white in the picture is not the bright white of the actual vans.

Yes Robert thanks for sharing. I always like the Orange and silver placard ones the best. I have plans to make a Cooper Jarrett but not like these

Last edited by lee drennen

lee drennen: The new wheel chocks held the trailers better but the front end of the trailers would still slide from side to side.
I then made a chock for the front also and it was a lot better. I then discovered that with the front tied down the original chocks worked OK.

Photo 1Photo 2PIGGYBACK FRONT B 2

The front chock attaches with a 6-32 x 3/8 in screw and nut through an existing hole in the flat car.
I have attached an (.stl) file that can be 3D printed if anyone else would like to try it out.

Attachments

Images (3)
  • Photo 1
  • Photo 2
  • PIGGYBACK FRONT B 2
Files (1)

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×