Skip to main content

John T. posted:

As of today, the mural for the layout is DONE!  I had applied the last item to the painting:  a hot air balloon with an OCSMR banner flying in the wind.

Below is a video clip of the entire mural from beginning to end. 

John, I hope you don't mind me saying, but I see your art skills sharpening as the mural progresses. Great job.

Mark Boyce posted:

Ah, superb, John!  You did an excellent job blending in those columns so they won’t be noticed!  The whole project is excellent!!

Thank you very much, Mark.  It was a big project, but it was well worth it.  Now, I just have to put the cherry on top (aka the military tower top) and it's done.

Thank you for watching.

Pingman posted:

John, wonderful craftsmanship on those excellent modifications.

Suggestion:  Perhaps you can ask the Moderator to edit the thread's title to include the date of an update; this alerts folks like me who find it easier to click a serial thread when we know there is new info or photos.  I suggest the moderator only because you are not the thread's starter and only that person can, as far as I know, edit a thread's title.

Again, thanks for the photographic update and explanation.

Thanks and you're welcome, Pingman.

And, needless to say, the Moderator has spoken.

Will posted:
John T. posted:

As of today, the mural for the layout is DONE!  I had applied the last item to the painting:  a hot air balloon with an OCSMR banner flying in the wind.

Below is a video clip of the entire mural from beginning to end. 

John, I hope you don't mind me saying, but I see your art skills sharpening as the mural progresses. Great job.

Thank you kindly, Will.   I appreciate your observation.

Hi Guys,

The military base now has the final touch.

The top to the lookout tower is now installed over the electric outlet above the base.  This box can be removed and put back easily in case any O Scale crew member needs to access the outlet for plugging in appliances or resetting the AC.DSCN7005DSCN7004

Also, as an extra update, I have added to my last post regarding the other 3 touch-ups with photos of what they were before.

Anyway, thanks for watching!

Attachments

Images (2)
  • DSCN7004
  • DSCN7005

Scenery work  continued. Greenery appeared in the area near the transformers.  Ted had the easy job of climbing on the layout.  Additional details were added in other areas too.

2020-01-26 0012020-01-26 0022020-01-26 005

Started cutting and fitting plywood to build up the road surface to the level of the EZ-Streets in the northwest corner of the layout.  Scenery on the inside area of the tracks will be mostly streets and pavement since it's an "urban" area.

2020-01-26 0032020-01-26 004

 

Attachments

Images (5)
  • 2020-01-26 001
  • 2020-01-26 002
  • 2020-01-26 005
  • 2020-01-26 003
  • 2020-01-26 004

I added a bunch of ducks lined up like they usually float in the water, put a fisherman on tne inside of the bridge dropping his fishing line into water and added 2 more boats to the water below the Atlas double line bridge. The bridge is in the background behind where I was scenicking. More pictures to follow.

The lift up hatch in the center of our American Flyer area to be attached real soon with scenery work to take place on the southern end of the layout. Bud is currently working on the elevated area on the south end and wiring of those accessories will be done soon.

 

Last edited by Ted Bertiger

If you look closely, you will see the fisherman in the front of the Atlas bridge in the 2nd or 3rd picture that Bud posted recently. It may not be a fisherman but...  "could it be Bud himself jumping off the bridge cause he cut a piece of wood incorrectly after 20 attempts"? Lol!

Moving along as the lift up hatch in the center of the S gauge loop was installed. We will be moving scenery operations to the south end of the layout and we will be constructing the corner pop up in the far left corner and placing the Menards power and light building there.

Last edited by Ted Bertiger

A shot similar to a wider angle shot of the coaling station area that appears on our Facebook page taken bytour HO superintendent Chris.  That shot prompted Steve Ross to contact us to let us know that a piece of center rail was missing from one of our Ross switches.  Anyway...

2020-02-21 001

Don't let your cars sit out in the rain.  They shrink to HO size.

2020-02-21 002

The hatch on the upper level.

2020-02-22 001

Tom framed out the access hatch for the southwest corner.  No pix cause of obstructed view.  The power station will be located in that area.

Ted soldering extension  wires to power the EZ Streets roadway after receiving instructions on "How to Solder Two Wires Together in One Thousand Words or Less."

2020-02-22 002

The EZ Streets controller located and installed.

2020-02-22 003

Taking EZ Streets car for a test drive.

2020-02-22 004

Applied first coat of paint (needs at least 2 coats) to the plywood used to widen the roadway next to the EZ Streets.  The unpainted area will have a second layer of plywood added and painted for sidewalk.

2020-02-22 0052020-02-22 006

 

Attachments

Images (8)
  • 2020-02-21 001
  • 2020-02-21 002
  • 2020-02-22 001
  • 2020-02-22 002
  • 2020-02-22 003
  • 2020-02-22 004
  • 2020-02-22 005
  • 2020-02-22 006

Bud instructed me how to solder 2 wires together in his 1000 words or less manual( really is 999 words, the scaled-down version). 3 wires, then you need to get the expanded Bud encyclopedia book!

The triangular pop up in the corner was built yesterday by our in house carpenter, Tom. Then Doug and I cut the double wide green foam and glued that onto thin wood board. Letting the glue dry and will pop it in and place the Menards power/ light building there in the corner.

Scenery work to start up again this week in the area where the Power/Light building is located, then moving towards the S gauge area and to the front. Still have wiring of those buildings there to do. 

Then, finally running power feeds to all the terminal strips under the layout from the transformers we have set up on a cart below the layout. I've tested each building lights so tnry do work.

Menards power light building was installed on the rear pop up with scenery and a few trees. Need to add transformer plug for the Led lighting in it.

Also added a ballfield directly on top of the hinged pop down which is in the middle of the S gauge loop. The wooden stand, 2 dugouts and the 2 refreshment stands have been liquid-nailed to the surface so when the pop down is opened downward, nothing will fall off. Still have to add the actual ballfield with players. 

IMG_0536IMG_0537

Moving along till next time...

Attachments

Images (2)
  • IMG_0536
  • IMG_0537

Well folks, it's going to be a few months until you see any new work done of our layout. With the club closing due to the pandemic, we are waiting for the town to have a professional cleaning company come in to sanitize the entire building.

Only project on the board is a showcase being built by a member to house the American Flyer collection that is on loan to us from the Ocean County Historical Museum. The collection was donated to them by the widow of John Bartlett who passed away a few years ago and was the lead Ocean County Freeholder. They wanted it fully displayed someplace and contacted me. We can use it if we choose to do so. The collection will be on display at our club and will show whose collection this was. A very nice American Flyer collection.

That's all for now...

Last edited by Ted Bertiger

Hello folks,

It has been almost 2 months since we closed temporarily and one of my club members built this wooden showcase with 3 glass shelves so we can store and show off the American Flyer collection we received. If you read my previous post, it tells you all about this nice collection. We delivered it today and we really wanted to fire up the layout but we are not allowed to stay there for a length of time. Getting antsy to get back there to work on the layout and do some additional scenery and wiring.

Attachments

Images (1)
  • mceclip0

Just want to let everyone know that our club still exists and patiently waiting for the township to reopen the public buildings and our building is in the rural area of Lakewood away from the mini-city it has become.

2020 has been a rough year for us besides having to shut down on March 19th, we lost 4 club members who passed away as well. We look forward to getting back there to continue our work on the HO and O gauge layouts with the hope we can reopen and meet as a club in April 2021. I really miss the camaderie that our club has with the 40 members we have.

For now, everyone who has followed our progress over the years since we moved 6 years ago, thank you and have a Happy Thanksgiving.

Ted Bertiger

Last edited by Ted Bertiger

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×