Operating Culvert Loader dimension and operation?

StrogeyOGR Forum Member

Is there anyone out there in OGR forum land that can measure the footprint required on the loader side of the siding. I do not need the footprint of the entire unit, just the space required for the building side of the track.

Also how tempermental is htis accessory? And if tempermental what tricks/tweaks are needed to improve performance.

Thanks!
Ken

1/4/123:44 PM

❤️ 0

Original Post

Replies sorted oldest to newest

david1OGR Forum Member

From the edge of the track it is approx. 6". I have mine hooked up and it performs perfectly. I do recommend that you use connectors to hook up any accesories,in case of a problem it is easier to remove for service.

Dave

1/5/1212:31 AM

❤️ 0

wb47OGR Forum Member DIGITAL SUBSCRIBER

The placement of the track is quite sensitive so that the culverts drop into the car correctly. When done right it works good. Just got a new one. There is a small adjustment on the electronic switch stop of about a quarter of an inch. I have always liked this accessory.

1/5/122:59 AM

❤️ 0

Skip to main content

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!