Re: Operating pantograph problem

ctrOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I have a Premier NEW HAVEN EP-3 with PS-2, 3 volt battery.

The pantographs raise and lower automatically in Conventional mode but not in DCS. Under DCS, they do not operate in either manual or automatic mode.
I have done both a feature and factory reset. Neither changes anything.
I have two other EP-3s both work properly.

Track signal is 10. TIU VERSION L. DCS 6.1.

Any suggestions?

6/14/201:48 PM

❤️ 0

Original Post

DanrOGR Forum Member SUPPORTING MEMBERDIGITAL SUBSCRIBER

I had a similar experience with a PS-2 GG1. Have you done anything with the sound file? I learned from George (GGG) that a flash code is necessary for the pans to work. Are all 3 of your EP-3’s using the same sound file?

6/20/208:42 AM

❤️ 0

Skip to main content

Add Reply

Membership Required

Remove From Your Block List

Manage Follow Preferences

Block

OGR Forum Supporting Membership Required

OGR Forum Supporting Membership

Help support this forum with an OGR Forum Supporting Membership.You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

OR

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGRwith a DIGITAL SUBSCRIPTION!

Please wait...

Help support this forum with an OGR Forum Supporting Membership.
You will be able to watch the videos in the INSTRUCTIONAL VIDEO FORUM!
A one-year OGR Forum Supporting Membership is only $12 per year, so sign up now!

Access the ALL the OGR VIDEO FORUMS AND over 300 back issues of OGR
with a DIGITAL SUBSCRIPTION!