Skip to main content

Before I turn on power, I want to be sure…..I have two loops of track, an 060 loop and a 048 loop….each powered by a PH 180. I am running lionchief + locos.  I am adding some switches to connect the two loops. So from what I read , the powerhouses should be phased and I really just need to pull the little wires in the fitter pieces so I do not put 20 amps to track. Pulling the little wires in two of the fitter pieces should isolate the loops , am I understanding correctly.  The switches are 060 so I will pull the wires off on the pieces that connect the switches

Last edited by Catdaddy
Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×