Skip to main content

Replies sorted oldest to newest

gunny posted:

Harmonyards,

They measure 17.4498 mm dia .9652 thick 2.184 wide

Thanks

Gunny

         

Part no. DE 0000014 is MTH tire measures 14.0mm X 3.0 mm that’s the only one I see in the book that’s close. Looks like you’d have to might shave down the thickness. A trial fitment would be in order.....I know a lot of us in O scale use MTH tires on Lionel products......hope that helps .......Pat 

Gunny,

Check Doug Pecks parts Listings that I pasted below, not sure if any of these have the same size drivers as the Berkshires. 

STEAMERS: GENERAL
1412
PULLMOR TRACTION BAND, for Steam engines; Thin band for flat rim (each)
 $2.50
STEAMERS: GENERAL
1420
PULLMOR TRACTION BAND, for replacement on "Flyonel" MIKADO, CHALLENGER, & BIG BOY steam drivers (each)
 $2.50
STEAMERS: GENERAL
1519
PULLMOR TRACTION BAND, for replacement on "Flyonel" Northern steam drivers

Aflyer

 

gunny posted:

WHY?  Because four engines have been thru TEN SETS since mid November.  I was hoping MTH made something with better quality!  Lionel has plenty but I do not like changing tires on new engines every day.

Gunny

Man, that is awful...   It would be interesting to see if you have better luck with the MTH ones, if you find the right size.   

 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×