Skip to main content



I looked for some ideas here on the forum  and wanted to add what I did to these nice shells that both had clean breakson both shells.

I have a hand jewelers drill and  as you can see you can come pretty close with the hole on both sides

I used a same size drill bit for its pin I used the JB super glue to mate them together

I ordered the Lionel nose protectors  and their ready to run..  you can still see the break but I hoping they wont all apart

time will tell.....daniel


Images (8)
  • 20210125_125821
  • 20210125_125743
  • 20210125_130010
  • 20210125_132501
  • 20210125_131420
  • 20210125_132740
  • 20210125_134640
  • 20210125_131716
Last edited by DanssuperO
Original Post

Replies sorted oldest to newest

Add Reply

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
Link copied to your clipboard.