Skip to main content

I read in a recent topic that post war engines belong on a display shelf and that the modern locomotives rule layouts.......or something to that sort...hahaha. in response to that I decided to snap a few pics of some of my post war armada. The FM trainmaster is a late 80's williams.








Original Post

Replies sorted oldest to newest

Decades after the modern offerings of today are relegated to shelf queen status, pre and post war Lionel trains will continue to run with the same reliability we have always experienced with these models.

They may not be prototypical, they may all have the same sound set and they may growl like wounded buffalo, but there is magic in those trains that may never be replicated.
I only run postwar stuff. I like the "mechanicalness" of the trains and find it a relief from today's electronic society. My Dad's '46 2020 is the loudest engine I have and remarkably, my stamped tin Marx 898 is my quietest. In this day of disposable stuff, I like the fact that my trains are pretty much all older than me and they keep right on running. Running around in circles a lot like I seem to do as well! Big Grin
quote:
Originally posted by handyandy:
I only run postwar stuff. I like the "mechanicalness" of the trains and find it a relief from today's electronic society. In this day of disposable stuff, I like the fact that my trains are pretty much all older than me and they keep right on running. Running around in circles a lot like I seem to do as well! Big Grin


Exactly! Good point! When I read about these guys spending over a grand for an engine with out of the box failures only to send them back time and time again I can go ahead and just enjoy my old reliable postwar trains! Big Grin Wink Cool
quote:
Originally posted by Harry Doyle:
Decades after the modern offerings of today are relegated to shelf queen status, pre and post war Lionel trains will continue to run with the same reliability we have always experienced with these models.

They may not be prototypical, they may all have the same sound set and they may growl like wounded buffalo, but there is magic in those trains that may never be replicated.


Don't see many post about those Pre-war trains running, not that they couldn't just that the folks who had them as children and adults have passed and the interest has naturally passed too.

Once the PW generation is gone it will be the modern stuff, even if converted with the latest command installed controls. It is just going to be a natural event, and many won't even know it occurred. G
quote:
they may all have the same sound set and they may growl like wounded buffalo,
I have unfortunately, or fortunately, never had the honor of hearing a wounded buff. But just out of curiousity, would that be an African Cape Buffalo, an American Bison or an Asian or South American Water Buffalo??

Someone once said a Cape Buff has a way of looking at you as if it thinks you owe it money.

And I'm told they can get a decided unpleasant attitude about them when wounded.

Anyhow, sounds like a "coffee grinder" is how I've heard our Post War described...
quote:
Originally posted by LS1Heli:
quote:
Originally posted by groundhogslayer:
post war engines belong on a display shelf and that the modern locomotives rule layouts.


Gone for a couple of months and the stupidity still lurks like a Musky in the weeds.


That quote isn't really accurately attributed, as the OP was quoting and dismissing a third party.
My dad's Lionel WP F3's are probably my favorite engines. I have no intention of buying a new set of them or upgrading the old ones. The growl of those motors is a neat sound. The reliability of the old pieces is hard to deny as well. Although I prefer to model with a certain look and prefer to buy certain products, in the end I run anything that seems fun.
quote:
Originally posted by jojofry:
Not to start a fight but i have several postwar trains and they might run good but there boring... Dcs and legacy please...


No offense taken here Jojo. DCS and Legacy are the future of this hobby and hopefully it will bring in some of the younger folk. For me and many others, we prefer the nostalgia, the history, the quality, the weight and the magnetraction of the postwar locos.
I tried to run my 1960's 736 berk on the club layout at the last train show and the new TMCC control equipment couldn't handle it Wink

Actually the layout is huge, the power all comes from one point and we had a tiny little extension cord powering it all. Even our modern engines were having issues that day. We kept having issues when my Williams TMCC 773 was running on the same line as an SD70 heritage unit (Lionel legacy).

I love postwar stuff and modern alike. Both have their high and low points.
Most of what I own is post-war but I have plenty of the modern equipment as well. I have found that over the last few years I have been running my post-war Lionels about 90% of the time with less and less operating time for the newer stuff. I still like the modern technology but just got tired of running the stuff. Conversely, I've never grown weary of running my F3s, Alcos, Berkshires, Turbines, Baby Hudsons, Lionel's unique K4 Pacifics and even the 2-4-2 Columbias. I guess its nostalgia. In fact, I'm headed for the train room right now to fire up some of my "Growlers".
quote:
Originally posted by laming:
Hey OHHIKER:

What kind of Alco's?
Smile

Alas, I can't head out to the train room to fire up some "Growlers". Instead, I gotta' go work the night job here shortly. Guess I'll fire up some different "growlers" within an hour or so. Big Grin



The good FA Alcos from 1950 to 1953. Specifically the 2023, 2031, 2032 and 2033. These are great runners.
I tried to run my 1960's 736 berk on the club layout at the last train show and the new TMCC control equipment couldn't handle it

Did it shut the TMCC down ?
My 682 turbine did the same thing.
Come to find out it's the whistle in the
tender doing it....

Add a .1uf capacitor between the pickup and and frame.
cleaned the problem right up....

I've had hand cars do the same thing...
quote:
Originally posted by Stoshu:
I tried to run my 1960's 736 berk on the club layout at the last train show and the new TMCC control equipment couldn't handle it

Did it shut the TMCC down ?
My 682 turbine did the same thing.
Come to find out it's the whistle in the
tender doing it....

Add a .1uf capacitor between the pickup and and frame.
cleaned the problem right up....

I've had hand cars do the same thing...


No, we just didn't have enough power to run it. We used all the modules which make a real big setup and power is really only connected at one spot and fed around the modules. We still lost a lot of juice at the far end. My TMCC GP9 (pull-mor motor) wasn't running either and it did most of the running at the show before the 736 trial. I might try again at the show this weekend to see if it will cooperate on a slightly smaller setup with fewer layout modules.


Are you a Glancy club member (just curious since you're in plymouth)? If you are and you were at the Gratiot Valley show in November you probably saw the engine in the roundhouse on the layout.
Are you a Glancy club member (just curious since you're in plymouth)? If you are and you were at the Gratiot Valley show in November you probably saw the engine in the roundhouse on the layout.

YUP....
I attended the show but did not run. I did the festival of trees
and GFV over December....
I'll probably run at the Troy show on the big layout.

We still lost a lot of juice at the far end.

I'm surprised to hear that. Maybe it's from all the crud
and candy cane residue from the holiday's Big Grin
quote:
Originally posted by MichRR714:
quote:
Originally posted by SantaFe158:


No, we just didn't have enough power to run it.


Jake, that particular day we also were dealing with a flaky TPC.


I know we had some issues. You'd know better as to what they were Smile I still had a lot of fun that day and can't wait for this weekend.
quote:
Originally posted by Stoshu:
Are you a Glancy club member (just curious since you're in plymouth)? If you are and you were at the Gratiot Valley show in November you probably saw the engine in the roundhouse on the layout.

YUP....
I attended the show but did not run. I did the festival of trees
and GFV over December....
I'll probably run at the Troy show on the big layout.

We still lost a lot of juice at the far end.

I'm surprised to hear that. Maybe it's from all the crud
and candy cane residue from the holiday's Big Grin


We probably met at the show then (I can't remember Big Grin).
quote:
Originally posted by GGG:
Don't see many post about those Pre-war trains running, not that they couldn't just that the folks who had them as children and adults have passed and the interest has naturally passed too.

Once the PW generation is gone it will be the modern stuff, even if converted with the latest command installed controls. It is just going to be a natural event, and many won't even know it occurred. G

Ever look at the Tinplate Forum? Prewar still rides the rails.

John
I guess, I misinterpreted the original post about about "comeback". I have a nice prewar 224 that I add pieces too. Runs excellent, I also have a varied sample of Postwar engines I run.

Is it coming back and taking market share of the Traditional O or Command O?

Arguments about preference are useless because to each his own. But I do laugh at the comments that come in about how the "PW will still be running". My comment is by who when the current forumites are dead?

None of this is meant to denigrade those who prefer Pre-War or Post War.

I just think there are far more Grandparents and Parents, running Command controlled modern engines with their children and grandchildren, then the old stuff. Not that they don't run some old stuff. But the young kids I see want to operate the smoke, make sounds, uncouple cars. Even a 6 year old taking about smoke volume.

"I'll just consider the source." Pappy, what did you mean by this post? Do you know me? Did my original post attack you? Maybe you need to try some of MTH's new Tinplate with PS-3 DCS?

G
Postwar doesn't have to come back because it never left. Smile

Seems there will always be people who:

1) Love postwar and won't consider the modern, high-tech, detailed stuff, and

2) Those that love the modern high-tech, detailed stuff and feel postwar should be placed on the display shelf of history.

3) Eveyone else in-between.

I suspect many fall in the in-between catagory.

Rusty
Rusty, Amen to that. I'd still rather own the genuine article as opposed to the crappy Chinese made repro's. Give me a good old fashioned buzzing mechanical e-unit anyday. Lionel can keep its PWC and Conventional Classics. Half the fun of the hobby is the search for PW trains. Just wish there were more LHS's that specialized in them. They are a rare breed these days.

I had to laugh at another thread going to never never land because it got political, that is the Lionel price hikes and inflation discussion. What those folks REALLY need to worry more about is their modern locos losing over half their value through obsolescence. Just look at the MTH PS1 loco's... I got burned on them and will never go back. Do they think their PS2's will fare any better now that PS3 is out? I know how the game works... I worked for Intel for over a decade.

PW will hold up pretty well regardless as long as there are folks like us who appreciate them. While I enjoy some modern innovation (I've pushed for it) I reallllly appreciate the solid enduring quality of the American Made stuff. And when you buy PW from an American, you keep the money working in America. Unless of course the seller goes out and spends it on the Chinese crap.



++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
quote:
Originally posted by Tommys_Trains:
PW will hold up pretty well regardless as long as there are folks like us who appreciate them. While I enjoy some modern innovation (I've pushed for it) I reallllly appreciate the solid enduring quality of the American Made stuff. And when you buy PW from an American, you keep the money working in America. Unless of course the seller goes out and spends it on the Chinese crap.
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++


But I think that is the point, PW prices have not held up unless absolutely mint in the Box, part because there are less and less PW folks buying, and more and more as they age selling.

I know several of the Greenberg show dealers who moved away from it because of Price instability.

So all new stuff is "junk", you don't buy any new Lionel or MTH? G
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×