Skip to main content

Replies sorted oldest to newest

quote:
Originally posted by CarGuyZM10:
there seems to be a differing opinion on what amp fuse to use. What amp do you suggest? Thank you.


Michael R, the reason for the differing opinions is because 10A is the maximum value you would use. Fuses or breakers are used to protect what the transformer powers. You get the most effective protection if you used the lowest value that will hold without tripping. 10A would be needed to protect up to 3 passenger trains running at the same time. 3A would protect one freight train. 2A would protect all the modern switch machines on one layout.
Keep in mind that the fuses and breakers protect the transformer's components from overcurrent surges, but do not protect the train!. If you want to protect the train and wire runs from damaging voltage spikes,install a Transient Voltage Suppressor[TVS], at least one,on each power district at the transformer's output binding posts.

Install fuses/breakers on the Hot conductor that goes to center rail. The internal breaker on a post war ZW,for example, is installed on the Common but external protection goes on the Hot line.

Use a fuse or breaker that matches up with the load to protect the transformer. In any event as noted by others 10 amps[180-90 watts] is about the maximum output of a pwZW.

10 amp automotive resettable breakers work very well[10 amp rated breakers used on DC auto circuitry work well on 18 volt AC].
If you are going with fast blow fuses buy a box full.

I use 6 amp circuit breakers with my three 125 watt LW transformers. Running trains for 45 minutes for some friends this morning, the CBs threw at least twenty times. When one has 27 Marx remote but not non derailing switches derailments happen.

I have 18 volt bulbs across the CB contacts to indicate when thrown and the CB with reset buttons right on the control panels.

Charlie
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×