Skip to main content

Hello looking for some help.i have a pair of k-line f3 union pacific  cab # 965a and 964a units tether together. I pick theses up from the market place on Facebook. They were only run in conventional mode.can anyone tell how to set them up to run with tmcc.there four switches on bottom on engines. One for program  run .one for smoke.one for cruise control and one for rs ss. Not sure what is.if anyone know how to set them up please let me know.

Thank you.brian

Attachments

Images (1)
  • 16033805148364775307937264342140
Last edited by bkm
Original Post

Replies sorted oldest to newest

Beautiful Locomotives! For TMCC running, Set the four switches to:

  • Program/Run to Run
  • Smoke to Off or On (your preference)
  • Cruise control to On
  • Rail Sounds/Signal Sounds to RS.   

Since they were only run in conventional, they may or may not still have their TMCC (as originally delivered) engine ID setting of  "Engine 1."  If so, you can leave it or change it to your liking. If they seem to run oddly, try changing the Cruise control switch to Off.

Are both of these locos powered, or just one?

Last edited by Rich Melvin

Next step - assume someone did change the engine ID. You can change it to one of your liking from 2 to 99. If this procedure is new for you, it is the same as for any TMCC engine. For convenience, the attached paragraph is from a K-Line Diesel instruction sheet. We know it isn't 1, so you have one chance in 98 of choosing what it already is, in which case, your procedure will just overwrite the old number with the same, like your PC does.

Attachments

Images (1)
  • TMCC Change Engine ID
Last edited by OddIsHeRU

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×