Skip to main content

Updated 4/24/2021:

In my best Popeye voice: "That's all I can stands, cause I can't stands no more!"  I declare this house finished. 

I hit the house with another India ink wash and then sprayed it with DullCote.  In doing so, I noticed that the front gutter above the porch droops a bit in the corner.  Looks like the prototype to me.  Yeah, that's it.    Yup.  That's my story and I'm sticking to it.   

Next stop, layout.  And then another of Tillman Farm House.

IMG_0878IMG_0879

More when I know it. 

George

Attachments

Images (2)
  • IMG_0878
  • IMG_0879
Last edited by G3750
@G3750 posted:

Updated 4/24/2021:

In my best Popeye voice: "That's all I can stands, cause I can't stands no more!"  I declare this house finished. 

I hit the house with another India ink wash and then sprayed it with DullCote.  In doing so, I noticed that the front gutter above the porch droops a bit in the corner.  Looks like the prototype to me.  Yeah, that's it.    Yup.  That's my story and I'm sticking to it.   

Next stop, layout.  And then another of Tillman Farm House.

IMG_0878IMG_0879

More when I know it. 

George

I do a great Popeye impersonation. "Well blow me down!!!!" Looks fantastic George.

Updated 4/25/2021:

Thanks, guys!!

Last night I tried to start on the 2nd Tillman Farm House.  I started by identifying the walls that would be used.  Since this was going to be lit, I decided to paint the interior walls black to prevent that "glow" that sometimes happens with plastic structures.  Unfortunately, the paint can nozzles (a bunch of them) were clogged and uncooperative.  I watched a couple of YouTube videos on how to clean them.  Today, I bought some lacquer thinner, soaked a few nozzles, and was able to paint the backs a flat black.

IMG_0880

A few hours later, I flipped them over and hit them with the flat white for the exterior.

IMG_0881

I'll try painting the roof sections tomorrow.

More when I know it. 

George

Attachments

Images (2)
  • IMG_0880
  • IMG_0881

Updated 4/26/2021:

"Trouble.  That's right, trouble.  We've got trouble right here in River City".

IMG_0888IMG_0889

Trouble's real name is Maggie.  She's a 1.5 year old British short-hair we adopted last week.  It's not where she's sitting that's the problem.  It's that she jumps down a hillside, pulling out trees as she goes.

We're going to have to figure out a way to block off the basement from her.

George

Attachments

Images (2)
  • IMG_0888
  • IMG_0889
Last edited by G3750
@Mark Boyce posted:

Welcome Maggie!  My sister's calico used to jump on my layout growing up.  I'm glad our 5-year old rescue dog doesn't jump that high.

I'm not sure what we are going to do about this.  The of the basement steps are open (no door).  We are considering a number of options:

  1. Chemical deterrent - moth balls or something else that smells bad that will prevent her from climbing on the layout
  2. Adding a folding (accordion) door to the top of the stairs (I really don't want to go that route).  It would have to be removable, I think.

George

Updated 4/29/2021:

Between grading Python programs I managed to get the roof and walls painted for the 2nd Tillman Farm House.  The backs of the walls have been painted black to aid in keeping them from "glowing" when lit from within.  The roof got its Aged Iron texture paint followed by an India ink wash.

IMG_0897

Still need to do the foundation.  Windows are done.

More when I know it.

George

Attachments

Images (1)
  • IMG_0897
Last edited by G3750

Updated 5/5/2021:

Classes are over!  Final exams have been given, and grades recorded!  Only some paperwork remains! 

So I began assembling two walls for the 3rd house (the second Tillman Farm House) on the hillside behind the Steubenville PRR Station.

Here's the front gable end and the right side wall.  I had to touch up the corner with some white paint.

IMG_0916

In this next photo, I have clamped and glued two different walls where they form an inward corner.  Only their backs (painted black and with curtains applied) are visible.

IMG_0915

More when I know it.

George

Attachments

Images (2)
  • IMG_0915
  • IMG_0916
@Mark Boyce posted:

I trust you gave everyone an 'A'!    I didn't finish my Bachelors at night until I was 48.  You only get an A if you give the professor what he or she wants.

I'm not sure I see how that clamp holds in 2 directions, though I know it does for holding a 90-degree corner.

Mark,

No, I didn't give everyone an "A".     But a few got the benefit of the doubt (and more than they truly deserved).

The clamp is only a 90 degree one.  Maybe these 2 photos will explain how it works.  On the left, you can see the black rubber cushions holding the walls.  On the right is the "backside" of the clamp.  The right-angle corner is up against the backs of the walls.  The thumbscrews apply pressure.

IMG_0799IMG_0800

Does that help?  It's a very handy clamp for exactly this sort of thing.  I bought it a very long time ago in anticipation of constructing a large number of buildings.  Haven't had the occasion to use it much until now.

George

Attachments

Images (2)
  • IMG_0799
  • IMG_0800
@Mark Boyce posted:

George, I like how you tighten it at one end, but it gives support several inches away even when you build O scale buildings.  

I didn’t expect you would ‘hand out’ ‘A’ s.  I was amazed how adults would complain about getting a lower grade when it was obvious to me, another student, that they didn’t deserve it.

Thanks Mark.  You'd be surprised (or perhaps not) at how coddled students are these days.  We even have a director of "retention" (I think nearly all schools do).  I can remember being told "Hey, if you can't cut it we've got lots of people waiting for your spot." 

"What a world.  What a world."  (To quote the Wicked Witch of the West). 

George

@BillYo414 posted:

I sure don't miss the stress of finals and what not. Tests made me nervous. Application was/is where I am at my best. I would like to get my masters in something one day.

What are the fancy clamps you're using it? Are they intended for model building? I don't think I've ran across them at hardware stores.

The clamp is definitely for modeling.  I doubt you'll see it at a hardware store.  I can't even remember where or when (15+ years ago) I got it.

George

Updated 5/7/2021:

Work on the 3rd house progresses!  Here we have clamped together and glued the final wall assemblies.

IMG_0924

More photos of my favorite structure-building clamp.

IMG_0925

As you can see, we have curtains hanging in the windows.  These are made by City Classics.  I wish we had them for O scale.

IMG_0926IMG_0927

And for all that effort, the CA failed and the walls came apart as I removed them from the clamp.  I ended up gluing everything together after positioning it on the house's foundation.  Fortunately, holding things together for 10 seconds worked.

IMG_0928

Also today, I managed to complete and print out 2 sets of decals for some buses.  I applied GlossCote to the decals.

More when I know it.

George

Attachments

Images (5)
  • IMG_0924
  • IMG_0925
  • IMG_0926
  • IMG_0927
  • IMG_0928
@BillYo414 posted:

I'll keep an eye out or build my own clamps then. I'm sure I'll find some eventually!

The houses look great! Are you putting them on the hill as you go?

I'd try Micro-Mark for the clamps.  I don't recall where I bought them, but I'd be surprised if they didn't have them or something equivalent.

I will not put the houses on the hill until we are much closer to the end.  I have a good idea of their position, but still need to work out the exact slope(s) and the places for the sidewalks and stairs.  The street (Highland Avenue) is on a single piece of 1" styrofoam; it's the base.  I'll install that and then place styrofoam sections to prop the houses at the correct elevation.  Finally, I will use that Great Stuff / quilt batting technique to create the hillside itself.  Once built, I'll put the houses on it.  I do have to be careful to allow the lighting wires a route to the buses below.  The cross-section plan shows the concept (I hope).

Steubenville Hillside v010

George

Attachments

Images (1)
  • Steubenville Hillside v010

Updated 5/9/2021:

I made a determined effort today to get most of the 3rd house assembled.  I didn't get there, but I have managed to mask off the upper story (lighting only the bottom floor), get the roof on, and paint the trim (to be installed either later tonight or tomorrow).

IMG_0931IMG_0932IMG_0933IMG_0934IMG_0936IMG_0937

I still have the roof vent and chimney to paint and the porch needs to be assembled.

More when I know it. 

George

Attachments

Images (6)
  • IMG_0931
  • IMG_0932
  • IMG_0933
  • IMG_0934
  • IMG_0936
  • IMG_0937

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×