Skip to main content

I am looking to build/kitbash the Pennsylvania Clearance car #497125. It was made at the PRR shop from a prior inspection car which itself came from a PRR P68 passenger car. So the car has a smooth round roof, relatively smooth ( not ribbed-some rivet detail) sides and four wheel trucks. Most of my PRR passenger cars are in the 15-18" length and so I would prefer the clearance car to be the same. Plastic would be easier to work with than aluminum. I am having trouble finding a passenger car ( of any RR line) which I could use-so does anyone know of a toy train manufacturer who made a P68 type car-or even an  aluminum one and then I would purchase a plastic round roof to "fit" ( the roof is the part which will require the most alterations) -or a passenger car with a celestial roof which I could replace with a round one. Or any other suggestions you all may have. Thanks in advance, turtle7

Original Post

Replies sorted oldest to newest

Interesting car to model, and looks like it will require a lot of custom building.  I have never seen a P68 or a PRR clearance car modeled, but after looking at pictures, my suggestion would be to acquire any 15" or 18" baggage car with 4-wheel trucks, as you choose, and start the modification process.  Cutting out and rebuilding the "whisker" part will be quite a challenge.

I couldn't find plans for the car you wish to model, but plans for a P68 (the only one I could locate) seem to be obtainable from the Pennsylvania Historical Museum Commission for a fee.  At least then you will know where to start.

Good luck,

Chuck

Last edited by PRR1950

WOW  Thanks for those suggestions-this is, IMHO, EXACTLY what continues this hobby as so much fun for this old man. Pennsynut-I couldn't figure out how to get the address to some nice info/pictures of this car-but Google "pennsylvania clearance car" and the second or third recommended site will be "clearance car 497125 Ketstone Crossings"-some nice description and pictures. Prrhorseshoe curve-those GGD cars are perfect-except they are 21"-and all my Pennsy passenger consists are in the 15-18" ( mostly 15) range--so that car may be a bit too long. So I will talk with our #5 child ( a mechanical engineer for Briggs&Stratton) who use to be a WWII tank modeler and who builds such cars for me ( with lots of prodding)-to see what he thinks about using a 21" car.  Thanks so much-and if you folks come across a car which is even close, let me know. Thanks so much, turtle7

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×