Skip to main content

I have an atlantic engine 6-18095 I cannot set its ID for TMCC operation because it is stuck in forward and as soon as you increase the throttle on the transformer it takes off. I have tried to reset/reprogram the R2LC but can't because the engine moves forward. How do I fix my problem?? any thoughts?

Last edited by Bert39
Original Post

Replies sorted oldest to newest

Is the headlight flickering?

If so, your Atlantic Isn't receiving a good radio signal, either coming out of your command base, travelling through the tracks, or because your command base isn't grounded properly to the outlet it's plugged into.

Try hovering your hand over it while you're trying to program it.  This may increase the signal sufficiently to get it to work temporarily.  If it's presently flickering look for the headlight to stop when you do this.

Mike

Last edited by Mellow Hudson Mike

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×