Skip to main content

Crane hinged roof has broken off.  On the bottom side of the roof is a metal plate where a small wire used to be attached.  The crane will not operate now.  It did in the past when the roof and wire were attached.  I assume the roof is an antenna and the wire needs to be soldered back on?  Or is something else causing the crane to not operate?

Original Post

Replies sorted oldest to newest

Too late on the caution with the slack.  My grandson was having a great time and I neglected to issue the caution.  It has been my meager effort to untangle the lines that have resulted in the broken top (it was hanging on by only one hinge when I got it) and the remaining hinge broke and then the wire came off.  I am going to try my soldering skills (absent) and see if I can eliminate the lack of the antenna as a reason the crane does not operate.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×