Skip to main content

Replies sorted oldest to newest

I agree with flyer rich, the problem is probably in the viabrator tube. You can carefully cut the cardboard tube around the base. Inside you will find the viagrator mechanism surrounded by foam The contact on the viabrator can become corroded and stick to one of the other contacts. Carefully separate the contact and clean the points, Test, and than put the tube cover back on and glue the bottom edge back onto the base
I ended up replacing it with an AC Sounder sound board which fits right into the same space. Did this on a Rocket and a Santa Fe. It's cheap, gives you a choice of horns, bells, and diesel sounds. Also easy to install with two wire hookup. Also, If you want to put the engine back to original - there are no permanent changes.

John
Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×