Skip to main content

Replies sorted oldest to newest

@prrjim posted:

You could just run the 3rd rail pickup wire to the wheel contacts on the side that is not connected.    Be sure to check that both sides are not wired to together.

Thanks Jim

Since both "sides" are connected, I guess I can simply remove the center pick up and move one of the remaining wires to that motor connection. Will let you know if I blow anything up! πŸ˜³πŸ™‚

Mark in Oregon

Add Reply

Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×