Skip to main content

This loco's trucks rock up and down. While turning it scratches the paint etc. My track is as level as I can get it and no other engines have any problem.  I have solved this problem by putting 1/4" foam between the body of the loco and the truck.(on the end that has no spring).   My trucks have two posts connecting the trucks to the body of the loco. Mine has only one spring on each truck.

 

Question: Are they supposed to contain two springs on each truck to take the place of my homemade foam solution?

Original Post

Replies sorted oldest to newest

Originally Posted by F&G RY:

I have the Blue Version. No scratches under the cab. From top down. cotter pin,washer,frame base,washer,spring,truck base, spacer for coupler shaft,top of screw.

 

Love the Red set. Wish I could afford the Red one also. Using a photo posted by Chris L. as my Christmas wallpaper.

002

I'm flattered Jim but if this is the photo your referring to this one isn't mine! 

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×