Skip to main content

Replies sorted oldest to newest

 HEY msp, 

If you have used regular alkaline batteries ( whatever brand ) and you  have some of the residue on the contacts ,try cleaning them up and using some ACF50 on a cotton swab to coat the contacts.  If the residue is still present beneath the contacts use a little more ACF50 to soak into the hidden areas .  If need be, work the area a little for more immediate results.

The ACF 50 breaks up corrosion and residue  .   After it is present on the electrical surfaces it stops future accumulation of gunk.

Then try new batteries as mentioned .

I hope your screen and mother board are OK . 🤔

 

 

No residue cleaned the contacts and traded out for new batteries.....I guess i am dead in the water as i only have 1 remote.   I do have the WIFI but never use it don't like it ...but as of now i guess that is the only way to run my trains.....havent looked but I am sure these remotes are bringing a premium now.......Hmmm....

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×