Skip to main content

Replies sorted oldest to newest

  Not familiar with the piece. Not sure what’s on the other side or how tight it’s on there. You might just be able to tap the shaft with a block of wood. You will be tapping against plastic though. Or you could try a mini pic with a hook on the end. Probably try putting the hook in what looks like a triangle on the tab. Put the hook in there and pry on the shaft. You may have to alternate from one side to the other.

The tabs can probably be straightened back a bit for reassembly. A 12 point socket can be used to pop it back on.

Add Reply

Post
This forum is sponsored by Lionel, LLC

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×