Skip to main content

33029676_10209591873751952_6284929603920199680_nHi all. I am trying to repair the 52 fire gang car. There is a bearing that goes in the bottom of the armature. I turned it over to see if it could come out it didn't. So I drop in a new one and of course the armature did not fit. So on the underside of the car it looks like there could be a spot that the bearing fits in but looks flatten. Before I go to try to tap it out. I wanted to know if anyone has done this before. In the picture that spot is the area on underside I am talking about. Thanks for any info 

Attachments

Images (1)
  • 33029676_10209591873751952_6284929603920199680_n
Last edited by joe hall
Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×