Skip to main content

Replies sorted oldest to newest

you have to separate the 2 halves of the remote front n back if you separate it by force and open the remote to fast or wide you wheel brake the led screen wiring and the remote will be junk no other parts are available to repair the remote! watch video below!! p.s. you have to squeese the remote on the sides to get it to release from the top as you will see in the video! 

https://www.bing.com/videos/se...detail&FORM=VIRE

Alan

Last edited by Alan Mancus

I watched the video Alan, my point is a new remote that has never been apart does NOT come apart quite that easily.

@Alan Mancus posted:

if your concerned about soldering to the circuit board just cut the wires and splice it to the wires from the pc board to the thumbwheel assembly!

GAD!  Don't do that!  If you are not comfortable soldering the wires back on properly, let someone else do the repair!  I've had to start sending back repairs where someone has gotten into a locomotive or device and cobbled it up and then decided they couldn't really fix it.  Remember...

Attachments

Images (1)
  • mceclip0

Add Reply

Post
The DCS Forum is sponsored by
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×