Skip to main content

I have an MTH trolley that I am running on  Super Streets using the  D21 curves. I have one curve that the trolley gets stuck in (wheels spin) despite my efforts to remedy the situation. Interestingly, if I turn the trolley around (drive wheels now in back rather than in front), the trolley runs through the problem curve with no issues. Moreover, I can run it at a lower speed through all other curves which I prefer. The issue is this, by turning the trolley around, it always wants to start in the "backwards" direction. I can start it, change direction, and then it is fine. However, I want to set it up for automatic station stops w. announcements and don't know if I can do that when the engine "thinks" it is running backwards. Is there a way to change the normal direction on this trolley which would eliminate this problem?

Thanks, Paul

Original Post

Add Reply

Post
This forum is sponsored by MTH Electric Trains

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×