Santa Fe 3460 class, any freight use?

Lou1985 posted:

In the early 1950s when Santa Fe was able to dieselize all its passenger trains what happened to the 3460 class 4-6-4s (including the "Blue Goose")? Were they dead lined/scrapped immediately or were they put into freight use on the eastern lines? I can't seem to find any pictures of 3460 class locomotives in freight use. I'd expect the 3460 wasn't used to haul freight (Blue Goose) but I would assume the other 5, non-streamlined, locomotives in the class were. Maybe hot shot refrigerator or boxcar trains?

They had 84" diameter drive wheels, and where pretty "slippery", thus not much good for freight service. 

Hot Water posted:

Lou1985 posted:

In the early 1950s when Santa Fe was able to dieselize all its passenger trains what happened to the 3460 class 4-6-4s (including the "Blue Goose")? Were they dead lined/scrapped immediately or were they put into freight use on the eastern lines? I can't seem to find any pictures of 3460 class locomotives in freight use. I'd expect the 3460 wasn't used to haul freight (Blue Goose) but I would assume the other 5, non-streamlined, locomotives in the class were. Maybe hot shot refrigerator or boxcar trains?

They had 84" diameter drive wheels, and where pretty "slippery", thus not much good for freight service. 

That makes sense. Were they just stored and then scrapped? The 4-8-4s saw lots of freight use but that makes sense. 4-6-4s weren't much suited to that kind of use. 

I'd like to eventually pick up a late Santa Fe steam locomotive for freight use on my layout but a 2900 class 4-8-4 might be too large for my layout, hence why I was wondering about the 3460 class, since it would work if it was prototypical. 

Just going from memory, since I don't model Santa Fe, Lionel recently issued a VERY nice looking "hi-Bred" Santa Fe 2-8-2. Also, Sunset/3rd Rail issued a Santa Fe 4-8-2 some time back. You might try searching eBay for one of each.

Hot Water posted:

Just going from memory, since I don't model Santa Fe, Lionel recently issued a VERY nice looking "hi-Bred" Santa Fe 2-8-2. Also, Sunset/3rd Rail issued a Santa Fe 4-8-2 some time back. You might try searching eBay for one of each.

I've seen those two models. While nice they are out of my price range unfortunately. I know a 2900 class is too big for the section of my layout I would want to run it on. It has 054 curves. My MTH Premier GS4 goes around that area no problem, but on one of the curves there is only about 1/16" of a gap between the rear cab overhang and a lightweight passenger car parked on an 072 curve next to the engine. Being that a 2900 class is as large, if not larger, it's a no go.

But back to the 3460 class. After about 1952 or so were they just stored until 1956 or so, when they were cut up (except 3463)? 

All of the 3460 Class Hudsons (except for 3463) were scrapped in June 1956.

3463 was donated to the city of Topeka, Kansas August 1956.

3460 awaiting its fate:

Rusty

Hot Water is right.  There were other more useful engines for freight, still serviceable in the early 1950's.

There was still intermittent passenger work for the 3460's and all classes of 4-8-4's even after the final rednose F7's were delivered in 1953, because of second and third sections of regular trains during the summer and the holiday season.   The 3460's were first of those classes to be laid up good, because they were unsuitable as dual service engines and also unsuitable for grades west of Wellington.  The Santa Fe Locomotive Assignment Lists available from the Santa Fe Historical and Modeling Society archives in Temple, Texas have good information about the fading fortunes of steam power throughout the 1950's.

I have a Lionel 2-8-2 as well as a 2-10-2 and a 4-8-2 from Sunset.  The 2-8-2 should be able to run on any layout.  The other two are larger, but manageable.  The Sunset 2900 Class 4-8-4 is definitely a large engine that does not like O72 reverse curves.  Beautiful, yes, but temperamental on small layouts.  "O72 minimum radius" is not the same as "recommended for O72 curves."

So about the closest a 3460 class would get to freight service in the early 1950s would be on the #7 or #8 Fast Mail Express. That's something I could model with a 3460 class locomotive and several heavy weight/light weight baggage/RPO cars, and it would run fine on the area of my layout I want to run it.

There is a lot of photographic and train consist information that indicates that 3460's were very often used on Trains 7 and 8, so, yes, you have caught the scent of oil fired exhaust from the 3460 Class of large 4-6-4's.  

I guess never say never...

The 3464 on a work train:

Rusty

Well now I've got some options. The 3460 class (besides 3460) doesn't seem as documented as the northerns, probably because there were far more northerns than the 6 members of the 3460 class. 

I think work trains on the Santa Fe were restricted to 40 MPH. 

Pecos River Hudson's are decent and generally won't break the budget.  John Smith may have a few remaining.

John in Lansing, ILL

As I recall Scott Mann (3rd Rail) ran the 3450 class 'up the flagpole', and got an insufficient number of 'salutes'.  Of course, ditto for that road's Prairies (2-6-2), of which there were far greater numbers among several classes.

Yes, I do believe John Smith (Pecos River) has a few 3450-class he's disposing of from time to time.  They seem to pop up on Ebay a few times a year.  I have a couple....they're very nice models.  Typically very reasonably priced, too.

With only a total of 16 engines of the 4-6-4 Whyte arrangement in 2 classes on the ATSF, they are, perhaps, the red-haired stepchildren of the final steam years on that railroad.  The "Blue Goose" (The Shopton crew called it the Blue Bird....perhaps a little kinder, more respectful moniker?) was, of course, the darling of the prairie sprinters.  But, seeing Rusty's photo above....3460 awaiting the Grim Reaper's Torch...is almost too painful to look at.   (Sniff!)

Of course, a common mantra for this neck of the hobby in particular is always in vogue....'It's your railroad!  Run 'em as you like 'em!'  Pickers-of-Nit?.........

KD

I do not run scale.  I respect the ATSF.  But the Fast Mail on the SF is one of those trains which seem to have a lot of character.  You do not need matched sets.  And the makeup of the train changed in the years that it ran.  Steam. Diesel. Heavyweight.  Some lightweight.  Express boxcars.  Horse cars.  REA and NYC express flats and containers.  Run through cars from other railroads.  The main 7 and 8 via Raton.  Southern train via TX Panhandle.  7N and 8N to and from the Bay Area.  A world onto itself to model!

There is a hobby shop local to me that has a Pecos River Brass 3450 class hudson (late rebuild) mint in box. They want $900 for it, which seems a bit excessive. On looks and presence I prefer the 3460 class. I think I'll end up searching out an MTH model of a 3460 at some point.

I'm still leaning towards having it pull the Fast Mail. As you guys have pointed out above I can just create a motley crew of RPOs, baggage cars, and express cars and recreate the train. Or my other thought was a train of Santa Fe Pullman green express boxcars, REA boxcars, REA refrigerator cars, and a caboose. Kinda a "boxcar" section of the Fast Mail. 

rattler21 posted:

I think work trains on the Santa Fe were restricted to 40 MPH. 

John in Lansing, ILL

Actually it was work train cars -- some maintenance of way cars were restricted, but, if none of those were in the train, then it was allowed track speed.  Often though, there were restricted cars in work trains.  There were some ancient cars with arch bar trucks in Santa Fe MofW service through at least the 1960's.   You had to look at the Timetable speed restrictions for equipment restrictions, as Santa Fe did not issue a separate special instructions publication like many other roads did.

High-wheeled engines can run at slow speeds.  

I found some information about the last in-service days of the 3460 Class:

• In the late 1940's Santa Fe limited the cutoff to 60% to reduce the tendency to slip the drivers at high speed on wet rail, and this made them even less suitable for any dual service use.
• In 1949, 3463 was assigned to Clovis, assigned to the Scout.  All the way from Clovis to Belen -- about 200 miles -- is on a grade, 1% westbound ruling and 1.25% eastbound ruling.  The 4-6-4 was shown to be inferior to the 4-8-4's on this territory, and that confirmed that the 3460's were best suited for the territory east of Wellington, and there they stayed until retirement.
• In May, 1951, 3460 only was averaging 362 miles per day
• By February, 1952, the 3460 Class was only averaging 278 miles per day.
• On December 3, 1953, the 3463 was drained and stored and never was called for duty again.

This is in contrast to the various classes of 4-8-4's, which were being used much more in passenger and freight service through 1953, and in freight service through 1957.  The 3460's did not have a life after passenger service, as did the 4-8-4's.

This information came from Santa Fe Locomotive 3463, Kin of the "Blue Goose", by the late Lloyd H. Stagner, The Warbonnet, Second Quarter, 1999.

So that does settle it. The most "freight" hauling a 3460 class would do would be on the Fast Mail on the eastern end of the system. The nice thing is the Fast Mail has no set consist. Basically any ATSF express boxcars, RPOs, or baggage cars are fine. Along with REA express refrigerator cars/boxcars or baggage/express cars from eastern roads. It should end up being an interesting train to model. 

Lou1985 posted:

So that does settle it. The most "freight" hauling a 3460 class would do would be on the Fast Mail on the eastern end of the system. The nice thing is the Fast Mail has no set consist. Basically any ATSF express boxcars, RPOs, or baggage cars are fine. Along with REA express refrigerator cars/boxcars or baggage/express cars from eastern roads. It should end up being an interesting train to model. 

Just remember that, unlike the Santa Fe 4-8-4s and 2-10-4s, which primarily handled the "Fast Mail", those high driveled 3460 class Hudsons could NOT handle the same large train. Thus, you will need to model a shorter/lighter Santa Fe "Fast Mail" train.

Hot Water posted:

Lou1985 posted:

So that does settle it. The most "freight" hauling a 3460 class would do would be on the Fast Mail on the eastern end of the system. The nice thing is the Fast Mail has no set consist. Basically any ATSF express boxcars, RPOs, or baggage cars are fine. Along with REA express refrigerator cars/boxcars or baggage/express cars from eastern roads. It should end up being an interesting train to model. 

Just remember that, unlike the Santa Fe 4-8-4s and 2-10-4s, which primarily handled the "Fast Mail", those high driveled 3460 class Hudsons could NOT handle the same large train. Thus, you will need to model a shorter/lighter Santa Fe "Fast Mail" train.

That shouldn't be a problem. I've only got room for 6-7 cars, which should be just right for a "short" section of the Fast Mail.