Skip to main content

Please feel free to post in this thread any Sentimental Oddities in your collection and the stories behind them!

I’ll kick the thread off with a one time ugly duckling. 

I picked up what I guess was meant to be Melbourne Team from a auction for $5. was a real mess and no one dared to offer a bid.  I nicknamed it Pinocchio with its long nose and all. 

C45436A3-0B71-4A87-B178-3CADA1874BAE

I left in the one day drawer... until one day I realised that it had been kit bashed from a Ron Fox Models tinplate carriage.

At the time I lived not far from  Ron and though he is now retired he offered kindly made a pantograph for it.

Another friend resprayed the tram and it had its inaugural D cell battery guzzling run run on the T.O.Y layout at the Toowoomba 2019 Train Show. 

CB7C55E5-0BE5-428C-83D4-3918EDCDB8F6
No longer an ugly duckling this little tram has a sentimental place in the collection. 

Attachments

Images (2)
  • C45436A3-0B71-4A87-B178-3CADA1874BAE
  • CB7C55E5-0BE5-428C-83D4-3918EDCDB8F6
Videos (1)
trim.66D18858-30FB-4504-8834-9A3403D91988
Last edited by Jamie Thompson
Original Post

Replies sorted oldest to newest

What some might consider an abomination, an O-gauge Stephen Girard set:

A West Virginia friend had sent me a Lionel 248 that someone had nicely tarted up in SG colors. While it looked good dragging a string of the eight-wheel 607/608 coaches in factory SG, I wanted a pair of 629/630 four-wheelers for it. Finally found a pair of bodies at a local meet that someone had stripped to bare metal. Unfortunately they'd soldered in the window inserts, so repaint was done by careful masking (used Wood rattle-cans, SG slightly off from the loco). A few peel-n-stick decals and we had the baby set. Runs great, always gets a few laughs while tearing around the layout.

PD

I built these two O gauge locos to look like prewar engines to pull my small collection of prewar AF and AF-based tinplate trains. Both locos are Marx powered. The electric outline one is made of wood and PVC pipe pieces and the steamer is a highly modified Marx 999. The freight cars in the second picture started as an AF coach and baggage car a few years older than the red cars shown. These were absolute rust buckets. The coach ended up as the diner in the background of the first picture, the frame is the gondola. A styrene roof was built to turn the baggage car into a boxcar. New "litho" was drawn on my computer and printed on photo paper.

20170106_190103

cast1_zpsjhpshayc

Attachments

Images (2)
  • 20170106_190103
  • cast1_zpsjhpshayc

I have several items that I have inherited from my father-in-law (post war and Williams Reproduction) and brother (Marx), and all the ones I've kept have sentimental value to me; they were trains we ran together.  

The one that would classify as a Tin Plate oddity is a Lionel Prop Driven (actually wind up) Motor Car my brother would run around his small Marx layout.  We had fun with this one.  I plan to run it again soon.

DSC_0002DSC_0004

Attachments

Images (2)
  • DSC_0002
  • DSC_0004
Last edited by CAPPilot
pd posted:

What some might consider an abomination, an O-gauge Stephen Girard set:

A West Virginia friend had sent me a Lionel 248 that someone had nicely tarted up in SG colors. While it looked good dragging a string of the eight-wheel 607/608 coaches in factory SG, I wanted a pair of 629/630 four-wheelers for it. Finally found a pair of bodies at a local meet that someone had stripped to bare metal. Unfortunately they'd soldered in the window inserts, so repaint was done by careful masking (used Wood rattle-cans, SG slightly off from the loco). A few peel-n-stick decals and we had the baby set. Runs great, always gets a few laughs while tearing around the layout.V

 

PD

Great work PD on the repaint.  Especially since you had to mask the inserts. Your patience paid off! 👍

CAPPilot posted:

I have several items that I have inherited from my father-in-law (post war and Williams Reproduction) and brother (Marx), and all the ones I've kept have sentimental value to me; they were trains we ran together.  

The one that would classify as a Tin Plate oddity is a Lionel Prop Driven (actually wind up) Motor Car my brother would run around his small Marx layout.  We had fun with this one.  I plan to run it again soon.

DSC_0002DSC_0004

Thanks for the post. I love the Lionel Zepplin. I love how the prop is driven On theseto.

When a friend or relative is no longer with us.. running one of their trains sure brings back memories of the good times. 

handyandy posted:

I built these two O gauge locos to look like prewar engines to pull my small collection of prewar AF and AF-based tinplate trains. Both locos are Marx powered. The electric outline one is made of wood and PVC pipe pieces and the steamer is a highly modified Marx 999. The freight cars in the second picture started as an AF coach and baggage car a few years older than the red cars shown. These were absolute rust buckets. The coach ended up as the diner in the background of the first picture, the frame is the gondola. A styrene roof was built to turn the baggage car into a boxcar. New "litho" was drawn on my computer and printed on photo paper.

20170106_190103

G

Great work on the scratchbuilds. At a glance one would never pic that it wasn’t a period piece. They would be great fun to have running on the layout.

I think for my most sentimental oddity I have to depart momentarily from O gauge to HO

( Stone the Heretic!!! )

I am a big fan of ingenuity and sheer brilliance when it comes to faffing about with things , and my little live steam offering below is definately a great example of both ...

Sometime in the 1930's to 50's a man in the UK took on the challenge of creating a live steam HO locomotive and I was lucky enough to become its guardian into the future ...

Its a little wee masterpiece of engineering to pack all that into a loco less than 3 3/4  inches long and 3 inches from rail to chimneytop !

The wire you see out the back  is wound with wicking material and can be fitted into a brass sleeve reservoir for spirit , or into a small tender behind with a spirit reservoir ...

Fatman posted:

I think for my most sentimental oddity I have to depart momentarily from O gauge to HO

( Stone the Heretic!!! )

I am a big fan of ingenuity and sheer brilliance when it comes to faffing about with things , and my little live steam offering below is definately a great example of both ...

Sometime in the 1930's to 50's a man in the UK took on the challenge of creating a live steam HO locomotive and I was lucky enough to become its guardian into the future ...

Its a little wee masterpiece of engineering to pack all that into a loco less than 3 3/4  inches long and 3 inches from rail to chimneytop !

The wire you see out the back  is wound with wicking material and can be fitted into a brass sleeve reservoir for spirit , or into a small tender behind with a spirit reservoir ...

Now that is cool!

Is the man HO or O? He looks O scale to me with an HO EMD diesel power truck as the base. The whole thing reminds me of some of the early On30 little geared lokey things people used to build in that scale/gauge.

I've mentioned the Freeport  Milk Products car on this forum before and it is definitely one of my sentimental oddities - the base car is an American Flyer NYC reefer (example on left) which was hand painted and lettered.  It looks like the Flyer car was new when it was over painted. The Freeport graphics are correct for the real car and, given the probable time of the hand painting, I think the colors for the hand painted car are prototypical as well.

 

Freeport_Companysc

Attachments

Images (1)
  • Freeport_Companysc
Last edited by Robert S. Butler

I have two of these B&O class O-58 gondolas (the other is #345006) built by Tommy Arnold in July 1939:

100_4934IMG_1573IMG_1572

Note that they are really an early form of pig flat, not really gondolas; but, because they had sides, the B&O classed them as gondolas.

I also that have a 65' mill gondola B&O #450417 class O-60 built by Arnold in 1936. The only change that I have made to them is changing out the trucks to Athearn two-rail trucks and soon to be installed Intermountain metal wheelsets.

The hand-lettering in quite impressive to me; something not seen too often anymore. That has kept me from re-painting the cars, although a touch-up job might be alright.

They are sentimental to me as they are a direct connection with "old-school" modeling and now-departed people and clubs.

Attachments

Images (3)
  • 100_4934
  • IMG_1573
  • IMG_1572
Last edited by PRRMP54

@handyandy  He is a strapping O Gauge Driver , I think he looks the part

The Chassis I admit to not knowing exactly what it is , but due to the bakelite "waffle" bottom and plain slot engineering screw assembly it looks reasonably early , I have had suggestions of early Trix but I cant confirm myself .

Another sentimental loco to me is my lovely British Marx ...

It is just as much the story behind it as the unit itself ... I contacted an Irish seller about another loco he had listed on that worldwide aucton site , and our back and forth emails turned out that the bloke in question had acquired quite a few items upon his Uncles passing , and some of them from the pictures he sent to me were not cheap! I ended up getting that original loco ( which was a Biller modifed so it could run on Biller track AND normal O gauge ... very clever) at a very fair price .

So there I was faced with a rather large dilemma LOL! Some guy I didnt really know with thousands of £'s of items who was probably quite happy to accept a pittance for them , but sadly ( for me ) my "good guy " gene kicked in . I also didnt have a shedload of cash available to make him much of an offer anyway so that made the "Good Guy" gene a little more easy to swallow ...

To give you an idea he had 1900's Bings , Plancks, Carettes, Maerklins, early Rossignol, J deP, ... pretty much every desirable european marque between 1900-1940 ... as well as a few later units like this 50's British Marx .

So I spent a fair bit of time researching and giving him some estimates of values and hinting to him that he might be better served selling the collection thru a more upmarket auction house ...

I didnt have a shedload of desriable trains from him, but I did have a good nights sleep

 

So time goes on and a month or two later I get a package in the mail I dont remember ordering to be picked up at the Post Office ... and inside is this little fellow , with a note thanking me for my help and that he remembered me saying I had the electric version of the British Marx but had not been able to find a clockwork version ! and he was happy to fill that gap no charge .... So yeah .. as far as sentimental , that one might just top the list ...

 

Fatman posted:

I think for my most sentimental oddity I have to depart momentarily from O gauge to HO

( Stone the Heretic!!! )

I am a big fan of ingenuity and sheer brilliance when it comes to faffing about with things , and my little live steam offering below is definately a great example of both ...

Sometime in the 1930's to 50's a man in the UK took on the challenge of creating a live steam HO locomotive and I was lucky enough to become its guardian into the future ...

Its a little wee masterpiece of engineering to pack all that into a loco less than 3 3/4  inches long and 3 inches from rail to chimneytop !

The wire you see out the back  is wound with wicking material and can be fitted into a brass sleeve reservoir for spirit , or into a small tender behind with a spirit reservoir ...

What a gem! It’s so hard to scale down live steam as one can not scale down the actual water molecules which causes all sorts of unforeseen problems. I’m sure the builder had the patience of a saint. That truly is a loco to treasure.

Fatman posted:

@handyandy  He is a strapping O Gauge Driver , I think he looks the part

The Chassis I admit to not knowing exactly what it is , but due to the bakelite "waffle" bottom and plain slot engineering screw assembly it looks reasonably early , I have had suggestions of early Trix but I cant confirm myself .

Another sentimental loco to me is my lovely British Marx ...

It is just as much the story behind it as the unit itself ... I contacted an Irish seller about another loco he had listed on that worldwide aucton site , and our back and forth emails turned out that the bloke in question had acquired quite a few items upon his Uncles passing , and some of them from the pictures he sent to me were not cheap! I ended up getting that original loco ( which was a Biller modifed so it could run on Biller track AND normal O gauge ... very clever) at a very fair price .

So there I was faced with a rather large dilemma LOL! Some guy I didnt really know with thousands of £'s of items who was probably quite happy to accept a pittance for them , but sadly ( for me ) my "good guy " gene kicked in . I also didnt have a shedload of cash available to make him much of an offer anyway so that made the "Good Guy" gene a little more easy to swallow ...

To give you an idea he had 1900's Bings , Plancks, Carettes, Maerklins, early Rossignol, J deP, ... pretty much every desirable european marque between 1900-1940 ... as well as a few later units like this 50's British Marx .

So I spent a fair bit of time researching and giving him some estimates of values and hinting to him that he might be better served selling the collection thru a more upmarket auction house ...

I didnt have a shedload of desriable trains from him, but I did have a good nights sleep

 

So time goes on and a month or two later I get a package in the mail I dont remember ordering to be picked up at the Post Office ... and inside is this little fellow , with a note thanking me for my help and that he remembered me saying I had the electric version of the British Marx but had not been able to find a clockwork version ! and he was happy to fill that gap no charge .... So yeah .. as far as sentimental , that one might just top the list ...

 

I love the litho on British Marx. You truly deserved the engine. It’s guys like you that give this hobby a good name! 

PRRMP54 posted:

I have two of these B&O class O-58 gondolas (the other is #345006) built by Tommy Arnold in July 1939:

100_4934IMG_1573IMG_1572

Note that they are really an early form of pig flat, not really gondolas; but, because they had sides, the B&O classed them as gondolas.

I also that have a 65' mill gondola B&O #450417 class O-60 built by Arnold in 1936. The only change that I have made to them is changing out the trucks to Athearn two-rail trucks and soon to be installed Intermountain metal wheelsets.

The hand-lettering in quite impressive to me; something not seen too often anymore. That has kept me from re-painting the cars, although a touch-up job might be alright.

They are sentimental to me as they are a direct connection with "old-school" modeling and now-departed people and clubs.

What a treasure. I’m glad you have the history behind this masterpiece. The hand lettering sure is impressive. From a time when skill and craftsmanship gave birth to the industry we have to say. 

Here’s a picture of my crossing gate that I got as a birthday present sometime in the 1960s. I clearly remember the trip to downtown Philadelphia with my Dad on a bus where he bought the signal for me at Nicholas Smith, It resides on a shelf in my office and I look at it often and remember that wonderful day!

F51FC742-860E-45FF-BB09-4987DCCA7E7B

Attachments

Images (1)
  • F51FC742-860E-45FF-BB09-4987DCCA7E7B
stangtrain posted:

Here’s a picture of my crossing gate that I got as a birthday present sometime in the 1960s. I clearly remember the trip to downtown Philadelphia with my Dad on a bus where he bought the signal for me at Nicholas Smith, It resides on a shelf in my office and I look at it often and remember that wonderful day!

F51FC742-860E-45FF-BB09-4987DCCA7E7B

What a memory to treasure! You have looked after it well. Looks like new!

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×