Shared Track for 2 main lines | O Gauge Railroading On Line Forum

Flyer Repair GuyOGR Forum Member

Can someone tell me how to use 670 or 697 track trips to auto throw
switches and operate 761 semaphores to power the isolated section of track
between 2 main lines. I'm using a 30B trans. The switches are set (2 train oper). A wiring diagram along with where to put fiber pins would be greatly appreciated.

1/31/1211:47 AM

Original Post

Replies sorted oldest to newest

ErierailroadOGR Forum Member DIGITAL SUBSCRIBER

http://www.youtube.com/watch?v=O4mH-uV89HA These guys know about automatic operation, start here.

Jack

FlyerRichOGR Forum Member

Gilbert made relay devices for this purpose as #26671, 26672 and 26673 Track Trips. They seem to be semi-difficult to find but are not all that complicated. I would think that Radio Shack could supply the necessary relays to duplicate their operation. Photos and original instruction sheets detailing the hook-up can be found at Trainrefs.com: http://www.trainrefs.com/Refer...pdates_frameset.html

Anyone ever used this method?

2/12/1211:15 AM

herbw2OGR Forum Member

americanflyerexpress.com sells instruction sheets for $4.50 including postage.

There are also some instruction sheets on ebay.

2/12/1212:26 PM

Flyer Repair GuyOGR Forum Member

Thanks for the info Guys.... I'll check it out

<div id="{%=id%}" class="reveal-modal small h-alert-modal-popup" data-reveal>
    <div class="first-modal-focus focus-utility-element" tabindex="0" aria-label="Inside Modal"></div>

<h4 id="{%=id%}_title" class="margin-bottom-10 popup-title"></h4>
    <div id="{%=id%}_body" class="margin-bottom-10 popup-body">
        </div>

<ul id="{%=id%}ButtonGroup" class="button-group h-popup-buttons even-button-group even-1">
    <li id="{%=id%}Okay_buttonContainer"><a id="{%=id%}Okay" href="javascript:void(0);" class="button success no-margin-bottom h-alert-modal-ok-button" role="button">OK</a><script type="text/javascript">
        (function() {
            function {%=id%}Okay_click(event, data) {
            {%=id%}Popup.hide();
        }
        
                $('#{%=id%}Okay').on('click', {%=id%}Okay_click);
        })();
    </script></li></ul><a href="javascript:void(0);" class="close-reveal-modal" aria-label="Close Modal">&#215;</a><div class="last-modal-focus focus-utility-element" tabindex="0"></div>
</div>
<script type="text/javascript">
        (function() {
            {%=id%}Popup = new SS.Popup.ModalPopup('{%=id%}');
        })();
    </script>