I have found great support before from many of you.
Tis time I have new issue:
I am running an MTH DCS system- 2 PS 2 Engines- I PS 3 engine on essentially 3 concentric loops- tied in with switches.
The inner loop is well separated from the outer loops- When an engine passes within close proximity to another- the system shorts out- makes no difference if it is 2 PS 2 engines or a PS 2 and a PS 3
Any ideas?
Thanks as always
Mike
Replies sorted oldest to newest
Define "shorting out". Is it tripping a breaker? Have you checked to see all the power districts are properly phased?
yes the breaker on the transformer pops
If I run just one engine no issues- also, as I indicated before, I can a run an engine on the inner loop with one on the outer loop- no issues
As far as i can tell all voltages are correct
Meter will be your best friend. Tie to rail spikes are worth checking on the switches. I had similar experience with a new crossover.
Access to this requires an OGR Forum Supporting Membership
