Skip to main content

Probably someone who understands how the SHS locomotives respond to the LocoMatic controller  and how the "Flyonel" Railsounds boxcar work can explain this.  When I couple a railsound boxcar immediately behind an SHS Consolidation, the locomotive will not respond to the commands of the LocoMatic Control box but the Railsounds boxcar responds to all commands.  However, if I move the Railsounds boxcar three cars behind the locomotive, the Locomotive responds to all the commands from the LocoMatic Control Box and the Railsounds boxcar responds to all commands . 

Does anyone know what is going on and why?

LittleTommy 

Original Post

Replies sorted oldest to newest

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×