Skip to main content

Replies sorted oldest to newest

The RS/SS selects Signal Sounds when the switch is closed.  So it sounds like either you have a short in the wiring or something is amiss with the actual RailSounds board.  Have you tried swapping another board in?  You can try any diesel of steam RailSounds 4 or 5 board to see if the wiring is suspect or it's the board.  If the new board still only gets Signal Sounds, you have a wiring issue.  If the new board does full RailSounds, the original board is probably bad.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×