Wondering how to correct this . On the handheld Legacy controller, the center keys on the touch screen do not respond, ie 2, 5, 8. I can not enter engines by touching these numbered keys. When I scroll they can be found and operate except for icons in the center line of keys. Running version 1.3 which I know is old. Any suggestions?
Thanks
Replies sorted oldest to newest
what are we talking about ????????????
990 Controller? Lionel repair probably needed
Send it to Lionel, that's not something you're going to fix.
This is why I am not an electronics person. At this point in life i rather do other things than learn. However the fix was very basic and rather embarrassing. All it took was new batteries. The battery meter showed one bar but I guess it wasn't accurate. Thankfully all is well and thanks again for the help.
Best
Ray
When the battery meter is showing one bar, it is time to change the batteries.
Hi, Guys !
I'm not use my Cab#2 since 1 year ago ! But when I went to use I have the same problem with touch screen numbers by colum 2.
Now I have been contact with the Lionel by e-mail but I not sucess with a return !
Is there a local where I can to fix? Or to buy parts?
Thanks !
gunrunnerjohn posted:When the battery meter is showing one bar, it is time to change the batteries.
John,
Not exactly true. I have used a cab-2 with rechargeable batteries all the way down to no bars and the backlit was still on. Even went to where is was no bars and then the backlit would not come on. THEN, it was time to change the batteries. 😀
I prefer not to have my train getting away from me while I'm looking at a dead remote. 
Access to this requires an OGR Forum Supporting Membership
