Skip to main content

Replies sorted oldest to newest

Alas, I think I have the AC/DC no sound --- although nothing from my e-Bay seller indicated this. Well, one learns.

By the way, how could I be sure of this ? The 605 was New in Box, but the instruction booklet does mention ''Locomatic or Soundtraxx DCC sound unit'' as an option.

So, I suppose I need additional stuff to get the sound out of it. Could you point out exactly what I need to add and where I can buy it, keeping in mind that I don't  want these features interfering with my other locos operating under my 18B transfo ?

Thank you very much.

Yes, it does. That loco does have a speaker. The native sound system is LocoMatic. The Locomatic system is described starting on page 8 of the owners manual. LocoMatic requires a LocoMatic controller described on page 11. It goes in series with your transformer and will not cause trouble with your other Locomotives.

 

The controller and boards are no longer made, but I'm sure you can find them. In fact, I'm sure I have both in never used condition. (I'm DCC, don't run LocoMatic. I was the SHS webmaster for the last 10 years so have a lot of SHS equipment, much of it never used). If you want me to see if I have these items, let me know.

 

By the way, all SHS locos except the SW1 had a LocoMatic option, and will all operate with the same SHS #00552 LocoMatic controller.

 

Alternatively, the units were designed and built for SHS by Dallee Electronics. I expect they would have a solution that would add sound to your loco, although it might not be a plug-in.

 

Bill

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×