Subject SD70Ace early vintage body mounting. There are small washers on some sd70 body mounting post. Others do not have them. There are also some washers on the body mount screws on some sd70 bodies. Some do not have them.

I’m in the process of screwing two sd70 back together after repair. I was able to sift through bodies at Nassau hobbies.

This is where I noticed the intermittent use of the washers. Does, anyone have a sd70 Katy 1988. I would be interested to see if any washers were glued to the underside screw mount holes. Especially, near the cab area.

Original Post

Yes I have all the early sd70ace most of the washers were glued from the factory the ones that came loose I glued back the washers are used to make the shell snuge to the frame if you dont use them over tigtning can stress the connection stems 

Miguel Gonzalez 

Miguel posted:

Yes I have all the early sd70ace most of the washers were glued from the factory the ones that came loose I glued back the washers are used to make the shell snuge to the frame if you dont use them over tigtning can stress the connection stems 

So, a total of 4 washers?

shawn posted:
Miguel posted:

Yes I have all the early sd70ace most of the washers were glued from the factory the ones that came loose I glued back the washers are used to make the shell snuge to the frame if you dont use them over tigtning can stress the connection stems 

So, a total of 4 washers?

See text below pictures.

 

9CFED4A0-DC13-4A2A-A910-7101A4BD9BB5ABF379F3-1663-44D8-9FA3-11FD04C1A350Miguel,

The washers are not between the body and the platform? They go where I placed them? The second set of holes below no washers? Is there one in the rear. See second photo.

Attachments

Photos (2)

Add Reply

Likes (0)
Post
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
×