Skip to main content

Replies sorted oldest to newest

Larry,

I hooked up the red wire to centre rail and the black to an outside rail. With track voltage cranked up to 100% (about 16 - 16.2 volts), then using the transformer whistle/horn button, I could get all 3 motors to spin but producing only a very feeble whistle sound. A tiny drop of oil to the motor spindles did not help. Anything you can think of to get more volume out of these whistles?

thanks, Bob

I an using an MRC 130 watt transformer. (Bought it from a retired model railroader, so I don't know its age.) Tried various powers from 1/4 through to full. Barely any motor spin at low voltages with increasing, but not adequate whistling, at full. It's as if I need more voltage. Maybe I do need to bypass the gray resistor. It is labelled R31. It is soldered into the board. No idea how to bypass. Can you tell he how?

Thanks to all, Bob

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×