Skip to main content

Oriental Limited Ajin CB&Q NE-1 Waycar



DSC08975



A year or so ago, I jumped on one of these at an auction. I had been eyeing Sunset's NE-4s for a while but was never impressed. The giant holes next to the marker lights to accommodate the wires always bothered me, and the ends look a bit crude if you ask me. So, for a couple hundred less, the body-only offering of these Ajin pieces sure are a great opportunity for fine scale modeling. To my surprise, I still haven't seen anyone do this import proper justice. It seems to me that people just threw some paint and decals without much consideration. Maybe I'm wrong?  



1665874810775_filtered

CB&Q waycar #14240 sitting between assignments



The underbody was scratch-built using both plastic and brass pieces from Wiseman Model Services and PSC. At one end, I built a housing for a 1.5v battery that powers the two Miniatronics 1.5v bulbs inside the marker lights. A simple on/off switch operates the lights, no need for pickups on this one! The marker lights are brass castings that had to be soldered to the body. They came courtesy of Wiseman Model Services. The trucks came from a Sunset UP CA1 brass import and had to be upgraded to better reflect the Qs wood waycar trucks. Let me know if you are interested in the UP CA1 caboose, it's just missing the trucks!    



IMG_6044



IMG_6187



This project turned out to be a bit of a challenge. The body details required lots of straighten and tinkering. Some noteworthy changes include: replacing the chains, closing the side windows that came modeled open from the builder, added coupler cut levers, added air line, added marker lights with bulbs, trim the cupola wires under the end roof, added roof ribs to simulate roof skeleton, and finally lots of filling in between parts to prevent dust from going into the car. The interior parts came from both Wiseman Model Services, Grandt Line and a gutted Atlas plastic caboose. The interior plan may not be 100% NE-1, but it is scale and it follows the prototype to a great extent.



IMG_6418 2



IMG_6422 2



IMG_6425 2IMG_6464



Masking wasn't easy, notice how the space between the roof walk planks are not covered to allow for the black paint to go between them. Also the cupola ends and roof ends have a black trim that is very thin but can be achieved with proper masking.

IMG_6394 2



IMG_6399 2



A few parts were most modelers fail to do the prototype justice is on the waycar cupola and roof ends. The cupola end windows have jail bars behind the glass panes. But, all models I have seen of this import have the clear sheet behind the bars. Nonetheless, if one looks closely, Ajin built the car correctly and provided a small step to accommodate a 0,10 sheet of polycarbonate. I added mine correctly using a bit of Micro Cristal Clear at the corners. Also, notice the black trim around the cupola. I've also seen models that divide the roof with the cupola, but this is not correct. Finally, the roof ends also have both a black and a brown trim. This can be done with careful masking, but it may test your patience.

DSC08978

The side cupola windows can be modeled flushed but it requires precision measuring so that the piece goes all the way next to the window frame. Notice that the jail bars are correctly modeled behind the window panes.

DSC08983



A few studio shots below:



DSC08962

DSC08997

I put a lot of effort into making sure the wood grain was still visible and not covered by the paint. This fine rendering is one of the highlights of the piece, but it can be easily erased with careless painting.

DSC08999



DSC09010





DSC08988



DSC09015



DSC08990

DSC08991



DSC08972



Attachments

Images (24)
  • DSC08975
  • IMG_6044
  • IMG_6187
  • IMG_6418 2
  • IMG_6422 2
  • IMG_6425 2
  • IMG_6464
  • IMG_6394 2
  • IMG_6399 2
  • DSC08978
  • DSC08983
  • DSC08997
  • DSC08999
  • DSC09010
  • DSC09015
  • DSC08988
  • DSC08990
  • DSC08991
  • DSC08972
  • DSC08975
  • 1665874810775_filtered
  • DSC08962
  • DSC09015
  • DSC08990
Last edited by SANTIAGOP23
Original Post

Replies sorted oldest to newest

During the process of working on the waycar I got to know it quite closely. One element that seemed offending or out of place to me was a horizontal brass piece with holes next to the cupola windows.

See image below from the same Oriental Limited model completed by someone else:

CC1C68BA-B4D3-4F61-8904-F3C8D2156FC1

None of the photographs from my research reference images was high resolution enough for me to actually identify the piece on the prototype. Thus, I decided to remove it from my model and to call it a “builder’s mistake”.  See image below:

9AB4652F-F470-40BF-B8F9-8ADE03A9DA59

It is only now that I found a picture that not only allows me to identify the piece, but to understand its function. On the prototype, it worked as a window slide support for the cupola window (the vertical piece was probably a window stopper). The drilled holes were probably drainage holes, so water wouldn’t sit and create rust. Correct me if I’m wrong. See image below:

69ED16DC-52A3-4B8B-A71B-B87C47C2295E

The piece was indeed out of scale, but it wasn’t a mistake. I won’t try to add a fabricated part to the model now that it’s finished, but I’m glad I have a better understanding of it now.

Attachments

Images (3)
  • CC1C68BA-B4D3-4F61-8904-F3C8D2156FC1
  • 69ED16DC-52A3-4B8B-A71B-B87C47C2295E
  • 9AB4652F-F470-40BF-B8F9-8ADE03A9DA59
Last edited by SANTIAGOP23

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×