Skip to main content

Replies sorted oldest to newest

Thanks Don and Jerrman...

 

The "viaducts" are made up of arch bridge sections made for me by Jim at Bridgeboss.  The decorative trim work between the individual sections is molding from Home Depot.  All of this was painted with a texture paint to give it a rough and weathered concrete look.  This was my attempt to install a bridge in a place that was going to be very difficult to do without cutting out part of the benchwork and removing as well as re-installing track.  I didn't want to do any of that so I came up with the idea of using the arch sections under the edge of the layout front and then adding the additional fascia concrete sections over the front edge above the arch sections.  This in affect made it look as though I had a bridge spanning in front of a bluff with track on the bridge as well as on the edge of the bluff behind the bridge..... By the way, since the picture was taken, I have and am still adding the bluff behind the bridge to complete the visual effect.

 

Thanks,

Alan

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×