Skip to main content

Replies sorted oldest to newest

Out of the storage container a few weeks ago......

960BE435-AF82-4DFC-9888-2C27C0E7CA1DE583EFF1-0ACD-4F85-81BA-E5041BB0F557

....and back together.....

AA59EB53-B4B8-432C-A274-CC60D0EA25C432823587-FE71-4D47-B777-01B25FBE48D68CB3546B-6127-44D6-8081-CEABBCE37831

Now, moving around built structures, unbuilt kits, etc....to see where they might work..... and, what I may need to look for at York....

5B59CD67-5124-4DCD-A554-840EEA9D66257620A8BD-4E75-4D01-8092-C18C2F2BDAB2

I have to have an open mind......if it doesn't work, then, don't force it.....

2A4BE0F6-C591-4D1D-86AB-014B7A9D40C28E146ABC-9D4D-42A2-9861-8B22C0D3A1BCA6BF962A-83DB-4A8C-8277-3AE4B48D9709

Have a great Sunday, folks!

Peter

Attachments

Images (10)
  • 960BE435-AF82-4DFC-9888-2C27C0E7CA1D
  • E583EFF1-0ACD-4F85-81BA-E5041BB0F557
  • AA59EB53-B4B8-432C-A274-CC60D0EA25C4
  • 32823587-FE71-4D47-B777-01B25FBE48D6
  • 8CB3546B-6127-44D6-8081-CEABBCE37831
  • 5B59CD67-5124-4DCD-A554-840EEA9D6625
  • 7620A8BD-4E75-4D01-8092-C18C2F2BDAB2
  • 2A4BE0F6-C591-4D1D-86AB-014B7A9D40C2
  • 8E146ABC-9D4D-42A2-9861-8B22C0D3A1BC
  • A6BF962A-83DB-4A8C-8277-3AE4B48D9709

Peter - your Woolworth repair came out great.

Last week I received a 1940s White Rose Collectibles PA motor patrol car. It was great timing as I was inspired by @stangtrain’s thread about his use of the Evans Designs vehicle lighting kit. I had a kit packed away but never had the right car for it.

40B61AF9-3A3D-49FF-AEF7-DCB407161F5C18B8AECE-AE68-47D2-BD6D-CDE7D33CEF29

The car’s tail lights doesn't make installing the red LEDs easy, so I skipped those. Once I grab a driver figure I’ll call this one a wrap.

Attachments

Images (3)
  • 202BE720-011D-48C4-8569-EA2BE515FC12
  • 40B61AF9-3A3D-49FF-AEF7-DCB407161F5C
  • 18B8AECE-AE68-47D2-BD6D-CDE7D33CEF29

I have been doodling up and printing more interior details for my next building in between other projects. I am at the stage where I’m good enough to be dangerous with my resin printing. After I prep and paint them, I store them in tackle boxes until use. I am also painting up a bunch of white metal parts. I always try to make extras while at it.

9D2F48C3-FC6F-40F6-A2EC-83D715FBF66E

7C347C19-C5F8-4B76-9048-663C39CD6D4717612ED7-CB89-42A7-B9B7-F23FB5E908FBD0C49A94-2CBF-4738-9E39-FB983F3D994FDD7453F9-AEEB-40EE-884C-C7CAEE6BFA45

The press was based on this one at the AOS roundhouse:

986B9316-9A10-4F38-97CE-9C1835C7B4E9

I printed a few more in different sizes. I had some trouble with the ram coming out crooked and I think I fixed it by running a core through it:

6B9687E2-26DD-4A4F-AF18-E017D2020FED

I also got to try making steam heaters for the walls. Here is one with a few little supports still stuck to it:

CCA7C069-A971-49B3-BA1B-E89C60FCB3B8

Attachments

Images (8)
  • 9D2F48C3-FC6F-40F6-A2EC-83D715FBF66E
  • 7C347C19-C5F8-4B76-9048-663C39CD6D47
  • 17612ED7-CB89-42A7-B9B7-F23FB5E908FB
  • D0C49A94-2CBF-4738-9E39-FB983F3D994F
  • DD7453F9-AEEB-40EE-884C-C7CAEE6BFA45
  • 986B9316-9A10-4F38-97CE-9C1835C7B4E9
  • 6B9687E2-26DD-4A4F-AF18-E017D2020FED
  • CCA7C069-A971-49B3-BA1B-E89C60FCB3B8

I have been doodling up and printing more interior details for my next building in between other projects. I am at the stage where I’m good enough to be dangerous with my resin printing. After I prep and paint them, I store them in tackle boxes until use. I am also painting up a bunch of white metal parts. I always try to make extras while at it.

9D2F48C3-FC6F-40F6-A2EC-83D715FBF66E

7C347C19-C5F8-4B76-9048-663C39CD6D4717612ED7-CB89-42A7-B9B7-F23FB5E908FBD0C49A94-2CBF-4738-9E39-FB983F3D994FDD7453F9-AEEB-40EE-884C-C7CAEE6BFA45

The press was based on this one at the AOS roundhouse:

986B9316-9A10-4F38-97CE-9C1835C7B4E9

I printed a few more in different sizes. I had some trouble with the ram coming out crooked and I think I fixed it by running a core through it:

6B9687E2-26DD-4A4F-AF18-E017D2020FED

I also got to try making steam heaters for the walls. Here is one with a few little supports still stuck to it:

CCA7C069-A971-49B3-BA1B-E89C60FCB3B8

those look great

Anthony,

The scene looks great. I can see some kids coming through the brush from the back of the terminal and going in through a hole in the fence. That’s what I would do if I lived near that place. Of course I am partial to storage tanks.

Steve,

Your progress looks great. Cannot wait to see the completed water scene.

Norm,

You are showing me that 3d printing possibilities are endless.

Great work Dave.

Beautiful station Mel.

Nice pickup Alex. A friend of mine has a real one of those.

Add Reply

Post

OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
800-980-OGRR (6477)
www.ogaugerr.com

×
×
×
×
Link copied to your clipboard.
×
×