Skip to main content

Hello, I'm looking to swap a PS1 board from an MTH Premier Alaska F3 AA set with a PS2 board from another MTH Railking starter set F3 (the smaller semi scale locomotive) I was just wondering is anybody has done this before and has any tips on doing so. I dont run the railking loco much anymore and figure that will be good under the christmas tree, and wanted more usability out of the Alaska locks on my layout (speed control, dcs etc).

Thanks for any help!

-KevinScreenshot_20211128-172943_ChromeScreenshot_20211128-173259_eBay

Attachments

Images (2)
  • Screenshot_20211128-172943_Chrome
  • Screenshot_20211128-173259_eBay
Original Post

Replies sorted oldest to newest

You're also likely to have to either add more wires to the connectors or lose features.  For instance, I suspect that PS/2 starter set doesn't have smoke.  It also likely doesn't have all the lighting features of the Premier.

We did also gloss over the fact that you have to move the tach reader and supply a new mount.

@GGG posted:

Buy a PS-3 Diesel kit and upgrade it right.  You will get into a lot of head aches unless you understand all the difference between PS-1 and 2.  G

This is the best advice, while moving the RK stuff can be done, it's going to be a lot of work with an uncertain outcome.

Add Reply

Post
The DCS Forum is sponsored by
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×