I have this post war Accessory that I am using with three rail tubular track, Activate it by using the 1045C clip. I have experience trouble where this tends to chew up train wheels, And sometimes causes uncoupling of trains. I will note I am using a post war 250 W ZW transformer, With TMC trainmaster controls.
I have tried using this accessory with a insulated rail but have to use plastic pins on each side of both negative rails to make it work. I don’t know why this is happening. I’ve used insulated rails elsewhere on my layout and only have to put plastic pins on the negative rail where it is insulated. My question is does this post or accessory interfere with trainmaster command controls. I’ve read in the Tmcc manual that the outside rails have a halo effect for a circuitry wondering if using this accessory causes interference.Can anyone point me in the right direction do I need to add something else to eliminate this from happening or can I not simply use this older accessory.