Skip to main content

Replies sorted oldest to newest

I use an old DC transformer from an Ho train I had laying around. Put positive on coil and ground negative side coil should engage. Disengage when you take power away. When coil is engaged check contacts with meter make sure you have continunity for the AC side. You could also put DC on the pick up roller and watch coil to see if it engages

Add Reply

Post
This forum is sponsored by Lionel, LLC
OGR Publishing, Inc., 1310 Eastside Centre Ct, Suite 6, Mountain Home, AR 72653
330-757-3020

www.ogaugerr.com
×
×
×
×
Link copied to your clipboard.
×
×